Odarabla's infinite BS thread for the foreskinned (AKA Smack Down)
#4425
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Your car has some good top end then. My car normally does 6.6@105mph in the 1/8th. With the best one being a 6.5@104mph. This is why I pulled the converter and had it recut to tighten it up some. I should be pulling more top end than I was to. You beat my beat top mph by 1mph lol.. When we did the math it looked like I was losing a little more that 1200rpm through the converter which would have put it around 10-12% slippage.. My last converter was at like 2-3% slippage so hopefully Kenny got this one as efficient as my old one..
#4426
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
I realize this.. The funny part is that 2SS thinks he is making 632rwhp but what he doesn't know is that the dyno's over there don't read in Horse Power!! They read Shepard Ponie power!! So 632SPP is something like 315rwhp in America.. They use fryer grease mixed with corn ethanol for fuel over there!! LOL Hell they don't even have paved roads yet!!
#4428
10 Second Club
iTrader: (2)
Well track went to ****. Some 800whp Supra that runs mid 10's broke and laid oil the whole way down the track. Two clean up. Tried right which is always worse spun hard. Go back to left. Anda Turbo termi brakes an axle. Cleaned up quick. Make pass spin and only cut a 1.77 60 ft. And ran a 10.8@130. They told me no more passes. .
#4429
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Well track went to ****. Some 800whp Supra that runs mid 10's broke and laid oil the whole way down the track. Two clean up. Tried right which is always worse spun hard. Go back to left. Anda Turbo termi brakes an axle. Cleaned up quick. Make pass spin and only cut a 1.77 60 ft. And ran a 10.8@130. They told me no more passes. .
#4433
Staging Lane
I realize this.. The funny part is that 2SS thinks he is making 632rwhp but what he doesn't know is that the dyno's over there don't read in Horse Power!! They read Shepard Ponie power!! So 632SPP is something like 315rwhp in America.. They use fryer grease mixed with corn ethanol for fuel over there!! LOL Hell they don't even have paved roads yet!!
#4435
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
I might be going to the track this wednesday to test the new converter if ya'll want to head out there..