What have you done to your car recently?
04-07-2013, 07:48 PM
#410
TECH Enthusiast
iTrader: (1)
Join Date: Jul 2010
Location: CroSSby, TexaSS
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
put it on jackstands a month ago now 
Waiting on center section to get back from MWC.
Still trying to find a Throttle body for my fast intake and a way to wire up my Leash Nitrous controller.
In other news, I bought a lift kit and some 35" tires on motometal wheels for my extended cab, cutting the front fenders after work tomorrow and installing the new front bumper mounting KC lights etc.
Waiting on center section to get back from MWC.Still trying to find a Throttle body for my fast intake and a way to wire up my Leash Nitrous controller.
In other news, I bought a lift kit and some 35" tires on motometal wheels for my extended cab, cutting the front fenders after work tomorrow and installing the new front bumper mounting KC lights etc.
04-07-2013, 08:29 PM
#411
I told my builder to leave my car at his shop until mid may for pfadt drag coilovers, boost by gear setup, and multiple tunes using HPtuner.
sadly, thats what I did this morning!
But I bought my wife a GT500 that I can plau with in the meantime!
sadly, thats what I did this morning!
But I bought my wife a GT500 that I can plau with in the meantime!
04-08-2013, 06:58 AM
#414
10 Second Club
iTrader: (8)
It starts and runs but had fuel leaks. I guess super unleaded and Aeroquip fuel line don't get along. I'm running hard line, should finish the return line today.
I rerouted a bunch of wires and vacuum lines to make it look cleaner. Made a bracket for the fuse box to hold it in a better spot. Put the windshield washer tank on it...which don't sound like much but since nothing really goes exactly where it goes it becomes a little something....same with the horns. Made a battery box and hold down for a smaller battery.
Changing out mismatched bolts and painting lots of tid bits. Made a couple carbon filler panels to fix a couple broke lights.
Put new rotors on it, sanded the pads, ran knew brake like to the rear because it had a piece in it I didn't like and it zig zagged out to the rocker and back. I made it in 1 piece and found the right clips for the lines. Finding all the right bolts for .....well almost everywhere.
The pressure side is not leaking now but I had to put a piece in it to stop a leak so I will hard line it next with 1/2" line. It needs a catch can on it now to.
Oh yea....it has all the trim on it now and I refinished all of it. Polished the car before I put the trim on too. Need to finish polishing the wheels after setting for a year. Exhaust needs adjusting....it fits like ****.
I rerouted a bunch of wires and vacuum lines to make it look cleaner. Made a bracket for the fuse box to hold it in a better spot. Put the windshield washer tank on it...which don't sound like much but since nothing really goes exactly where it goes it becomes a little something....same with the horns. Made a battery box and hold down for a smaller battery.
Changing out mismatched bolts and painting lots of tid bits. Made a couple carbon filler panels to fix a couple broke lights.
Put new rotors on it, sanded the pads, ran knew brake like to the rear because it had a piece in it I didn't like and it zig zagged out to the rocker and back. I made it in 1 piece and found the right clips for the lines. Finding all the right bolts for .....well almost everywhere.
The pressure side is not leaking now but I had to put a piece in it to stop a leak so I will hard line it next with 1/2" line. It needs a catch can on it now to.
Oh yea....it has all the trim on it now and I refinished all of it. Polished the car before I put the trim on too. Need to finish polishing the wheels after setting for a year. Exhaust needs adjusting....it fits like ****.
04-08-2013, 07:04 AM
#415
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like you've been busy.
I'm waiting on my friend to get back from Texas, so he can put my transmission back together, he's crewing for a X275 car at a big race.
I'm waiting on my friend to get back from Texas, so he can put my transmission back together, he's crewing for a X275 car at a big race.
[/IMG] 
04-10-2013, 03:25 PM
#420
Good deal man, Kevin was a great guy to deal with, very honest and upfront. Glad you got a killer deal!
Might be a lot of money but **** I had over $2k after parts/labor into my stock one. After you sell ur stocker and Trans brace (if u have one) the cost will be even less for the new c6z diff.
I finally ordered my tires so ill have the 15's mounted next weekend
Might be a lot of money but **** I had over $2k after parts/labor into my stock one. After you sell ur stocker and Trans brace (if u have one) the cost will be even less for the new c6z diff.
I finally ordered my tires so ill have the 15's mounted next weekend
As you know... the deal fell through with my diff.
Be careful with they're products... I have totaled two vettes with SPEC products that failed in them..another of which that is a mutual friends. Just saying... then, to boot, the company lies, and is full of ****.
True story-
