crushed a bpu+ supra on the highway!!!
#44
Staging Lane
Thread Starter
Join Date: Nov 2003
Location: wildwood Fl.
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SouthFL.02.SS
Did you notice if he started gaining just before shutting down at 115?
Anyhow, nice kill!
Anyhow, nice kill!
i pulled about three cars in the first two seconds of the race and then held my ground. he didnt pull on me, nor did i pull on him.
#45
Staging Lane
Thread Starter
Join Date: Nov 2003
Location: wildwood Fl.
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SDB
oh, I bet the LS1 and T6 is a lot lighter than a 421 cube iron block with a TH400! never mind...i figured it out.
my car weighed about 3450lbs. with my old 427 bb in it.
#47
"basic performance upgrade" I believe.
it's the common, low-cost, familiar, easy mods that everybody tends to start with.
i daresay that a bpu on an ls1 fbody would probably be lid, catback, and the free mods.
bpu on forced induction cars tends to be a more significant gain than n/a cars... although looking at this board, you might think that cam, nitrous, and clutch/torque converter are the BPU for ls1 fbodies... heh.
it's the common, low-cost, familiar, easy mods that everybody tends to start with.
i daresay that a bpu on an ls1 fbody would probably be lid, catback, and the free mods.
bpu on forced induction cars tends to be a more significant gain than n/a cars... although looking at this board, you might think that cam, nitrous, and clutch/torque converter are the BPU for ls1 fbodies... heh.
#49
Originally Posted by 5POINT7
Am I on crack, or did this guy hit SHIFT and then the letter for every word in his post? Screw the kill story, that's the weirdest post I've ever seen.