Street Racing & Kill Stories Basic Technical Questions & Advice

stock 2000 Z28 vs stock 1987 5.0

Thread Tools
 
Search this Thread
 
Old 09-12-2011, 09:10 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
SlaytonZ28's Avatar
 
Join Date: Jul 2011
Location: Jacksonville Florida
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default stock 2000 Z28 vs stock 1987 5.0

not much of a story but none the less we did multiple runs, all resulting in the ls1 prevailing which was expected. we did 2 dig runs where i got the jump both times and held on to it as i continued to pull cars on him. we ran from 30 which is my sweet spot, and ate him up. the closest race of the day was from about a 70 roll, but in the end, i still had him. The fox has drag radials, but other than that we are both stock...for now
Old 09-12-2011, 10:42 PM
  #2  
TECH Addict
 
It'llrun's Avatar
 
Join Date: Aug 2002
Location: N. FL
Posts: 2,708
Likes: 0
Received 0 Likes on 0 Posts

Default

The closest an 87 GT came was from a 70 roll? To what, 71? C'mon... those cars in stock form simply don't stand a chance against any LS1 F-body and frankly, basically any vehicle with an LS engine undehood... Seems it would do best from 0, since it had drag radials. Either way, it should be no contest... a mid 13's car vs a mid 14's car... not gonna end close with two similarly skilled drivers at the helm. Glad you had fun, but yeah... expected result.
Old 09-12-2011, 11:17 PM
  #3  
Teching In
Thread Starter
iTrader: (1)
 
SlaytonZ28's Avatar
 
Join Date: Jul 2011
Location: Jacksonville Florida
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah like i said we both knew the result before heading out, we were just looking for some fun. It seems damn hard to find races in this area, so ill take what i can get
Old 09-13-2011, 12:28 AM
  #4  
registered user
iTrader: (3)
 
ScreaminRedZ's Avatar
 
Join Date: Oct 2005
Posts: 2,940
Received 0 Likes on 0 Posts

Default

Good kill! I had a few great runs with some stockish 5.0 fox Mustangs when I had my stock LT1 cars. It generally takes a few decent mods for them to run down an LS1 fbody though.
Old 09-13-2011, 12:28 AM
  #5  
11 Second Club
iTrader: (9)
 
LS1rob00's Avatar
 
Join Date: Apr 2010
Location: Bay Area, CA
Posts: 978
Likes: 0
Received 1 Like on 1 Post

Default

Wouldn't have even wasted my gas lol older 5.0's stock are total dogs. As long as you had a good time that's what matters though!
Old 09-14-2011, 01:49 AM
  #6  
On The Tree
iTrader: (1)
 
BurtReynolds's Avatar
 
Join Date: Jul 2005
Posts: 173
Likes: 0
Received 0 Likes on 0 Posts
Default

Are they really that bad? I picked up a 63 fairlane last year with a h/c and was supercharged. The car weighs about 2800 without me. I am probably going to race both of my cars to see where it stands.

I'm still debating of putting either a turbo on it, GN motor, or a Ls based motor.
Old 09-14-2011, 09:32 AM
  #7  
registered user
iTrader: (3)
 
ScreaminRedZ's Avatar
 
Join Date: Oct 2005
Posts: 2,940
Received 0 Likes on 0 Posts

Default

Originally Posted by BurtReynolds
Are they really that bad?
They aren't bad at all. They just don't look great stock for stock when comparing them to the cars that are out today. That's just technology though.

The issue, in my opinion, is that they built up this awesome reputation over the years, so you get people who are just getting into cars thinking that the 5.0 fox is unbeatable, when stock they really have a mid-high 14 second car. Luckily the aftermarket exists
Old 09-14-2011, 09:36 AM
  #8  
Tech Apprentice
iTrader: (1)
 
Stopsign32v's Avatar
 
Join Date: Dec 2006
Posts: 191
Received 0 Likes on 0 Posts

Default

What a waste of gas
Old 09-14-2011, 09:46 AM
  #9  
registered user
iTrader: (3)
 
ScreaminRedZ's Avatar
 
Join Date: Oct 2005
Posts: 2,940
Received 0 Likes on 0 Posts

Default

Originally Posted by Stopsign32v
What a waste of gas
The only waste of gas is when people fill up the tank of their hybrids.
Old 09-14-2011, 12:48 PM
  #10  
Teching In
 
85mustang351's Avatar
 
Join Date: May 2011
Location: manning sc
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by LS1rob00
Wouldn't have even wasted my gas lol older 5.0's stock are total dogs. As long as you had a good time that's what matters though!
They are like a box of chocolates, never know what they have. My car looks bone stock. Most are slow but there a lot that run pretty well.
Old 09-14-2011, 12:54 PM
  #11  
Tech Apprentice
iTrader: (1)
 
Stopsign32v's Avatar
 
Join Date: Dec 2006
Posts: 191
Received 0 Likes on 0 Posts

Default

Originally Posted by 85mustang351
They are like a box of chocolates, never know what they have. My car looks bone stock. Most are slow but there a lot that run pretty well.
What does yours run/power?
Old 09-14-2011, 02:28 PM
  #12  
TECH Addict
 
It'llrun's Avatar
 
Join Date: Aug 2002
Location: N. FL
Posts: 2,708
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Stopsign32v
What does yours run/power?
Looking at what he's listed, I'll guess... 11.50's with slicks should be about normal. Depends on what we don't see, of course. I'd think if one is to build a 351W for 1/4 mile duty, it will have a good set of pistons and at least a decent set of parts to go along with some really good stuff, like the heads. That one looks like it should make roughly 400rwhp w/ stock compression and good flow before and after the heads.
Old 09-14-2011, 04:25 PM
  #13  
Teching In
 
85mustang351's Avatar
 
Join Date: May 2011
Location: manning sc
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

I dont think it quite makes that much power. Havent had it dyno tuned or taken to the track yet. It has decent pistons and what not. 10.5 compression revs to 7000 rpms. The guy who built it said prolly 380ish rwhp and high 11's with drag radials. Of course thats all speculation. I just wanted a fun street car. Its certainly no world beater. I was debating between a ws6 and my 85. Always had a soft spot for 4 eyes. Found a good deal and completely blew my budget to hell.
Old 09-14-2011, 04:54 PM
  #14  
Formally Simplɘ Jack
 
BoricuaHec01's Avatar
 
Join Date: Mar 2011
Location: Chicago
Posts: 1,453
Likes: 0
Received 2 Likes on 2 Posts

Default

Try running my uncle's 7 second 5.0 .....

Old 09-14-2011, 05:06 PM
  #15  
Tech Apprentice
iTrader: (1)
 
Stopsign32v's Avatar
 
Join Date: Dec 2006
Posts: 191
Received 0 Likes on 0 Posts

Default

Originally Posted by BoricuaHec01
Try running my uncle's 7 second 5.0 .....

Not taking anything away but 7's in the 1/8th can be slow or can be decently fast. More details needed.
Old 09-14-2011, 05:07 PM
  #16  
Tech Apprentice
iTrader: (1)
 
Stopsign32v's Avatar
 
Join Date: Dec 2006
Posts: 191
Received 0 Likes on 0 Posts

Default

Originally Posted by 85mustang351
I dont think it quite makes that much power. Havent had it dyno tuned or taken to the track yet. It has decent pistons and what not. 10.5 compression revs to 7000 rpms. The guy who built it said prolly 380ish rwhp and high 11's with drag radials. Of course thats all speculation. I just wanted a fun street car. Its certainly no world beater. I was debating between a ws6 and my 85. Always had a soft spot for 4 eyes. Found a good deal and completely blew my budget to hell.
I have a set of heads that would be just at home on your 351.
Old 09-14-2011, 05:08 PM
  #17  
Formally Simplɘ Jack
 
BoricuaHec01's Avatar
 
Join Date: Mar 2011
Location: Chicago
Posts: 1,453
Likes: 0
Received 2 Likes on 2 Posts

Default

This thing is NASTY, loud as **** and modded galore. I forgot the actual mods and HPs, but I'll find out again and get back to you. I seen a clip through a cellphone and nearly blew my ears off through phone speakers.
Old 09-14-2011, 05:17 PM
  #18  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,937
Received 428 Likes on 337 Posts

Default

I typically run old 5.0's from a roll in my 2500hd. They can get me by a little if they have a couple mods.
Old 09-14-2011, 05:25 PM
  #19  
Teching In
 
85mustang351's Avatar
 
Join Date: May 2011
Location: manning sc
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Stopsign32v
I have a set of heads that would be just at home on your 351.
Which heads?
Old 09-14-2011, 06:56 PM
  #20  
Tech Apprentice
iTrader: (1)
 
Stopsign32v's Avatar
 
Join Date: Dec 2006
Posts: 191
Received 0 Likes on 0 Posts

Default

Originally Posted by BoricuaHec01
This thing is NASTY, loud as **** and modded galore. I forgot the actual mods and HPs, but I'll find out again and get back to you. I seen a clip through a cellphone and nearly blew my ears off through phone speakers.
There are alot of nasty sounding cars that couldn't pull a wet noodle out of a chicken's ***. Not saying that this Mustang doesn't run...just saying.



All times are GMT -5. The time now is 01:24 AM.