Puppy kicked a 03-04 cobra
#62
10 Second Club
Thread Starter
iTrader: (8)
Your welcome to have a try at it. Can I borrow your et streets? I think I would be on my way to the 10's then. I'm trying to get there in dd trim.
Apperantly you have a comprehension problem....as usual. He jumped when I was at his fender and we ended up even with me pulling on the first one. Add that up for your self again. That means if we would've have started nose to nose I would've put a fender on him even with all my ******* up. I'd call that a win or at a minimum a draw.
#63
Banned
iTrader: (4)
Join Date: Feb 2011
Location: Hinesville GA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
built auto..yeah sure that helps alot no doubt
3000 tci stall..not that big of a stall..alot of ppl run 4k stalls for street/strip cars
you say procharged like it means it should automaticly make me run 10's. It's a P1 @ only 6 psi..not really alot there bud
cammed..yep..it has a very small (only a lil larger than stock) cam that is far from being a good cam for boost..the LSA is all wrong as well as small lift..it was on the car when I got it.
headers...yep..Mid tubes!!, and high flow cats..and Borla cat back..not the most optimal of exhaust setups BY FAR!
TB..lol yeah an 80mm..that's not much larger than stock incase you dont' know alot of ppl go alot bigger on TB's
suspension..yep I got some decent suspension mods but am also lacking alot of things most ppl use to get into the 10's such as QA1's...my suspension is far from impressive I assure you
Moser 12 bolt with 3.90's..yep about my most useful mod I have I must admit
anything else you ******** THINK you know about my car that I can help you understand?
Last edited by ilovechevy1; 12-18-2011 at 10:18 PM. Reason: de de
#64
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Kinda funny that someone with a mile long mod list is talking big about beating up on pulley only/bolt on cars.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
#65
I'd love to have a chance at driving your car down the track. I think I'd break it though. I have a heavy foot off the line.
#66
all you guy's see is mods and think you know everything about what I have
built auto..yeah sure that helps alot no doubt
3000 tci stall..not that big of a stall..alot of ppl run 4k stalls for street/strip cars
you say procharged like it means it should automaticly make me run 10's. It's a P1 @ only 6 psi..not really alot there bud
cammed..yep..it has a very small (only a lil larger than stock) cam that is far from being a good cam for boost..the LSA is all wrong as well as small lift..it was on the car when I got it.
headers...yep..Mid tubes!!, and high flow cats..and Borla cat back..not the most optimal of exhaust setups BY FAR!
TB..lol yeah an 80mm..that's not much larger than stock incase you dont' know alot of ppl go alot bigger on TB's
suspension..yep I got some decent suspension mods but am also lacking alot of things most ppl use to get into the 10's such as QA1's...my suspension is far from impressive I assure you
Moser 12 bolt with 3.90's..yep about my most useful mod I have I must admit
anything else you ******** THINK you know about my car that I can help you understand?
built auto..yeah sure that helps alot no doubt
3000 tci stall..not that big of a stall..alot of ppl run 4k stalls for street/strip cars
you say procharged like it means it should automaticly make me run 10's. It's a P1 @ only 6 psi..not really alot there bud
cammed..yep..it has a very small (only a lil larger than stock) cam that is far from being a good cam for boost..the LSA is all wrong as well as small lift..it was on the car when I got it.
headers...yep..Mid tubes!!, and high flow cats..and Borla cat back..not the most optimal of exhaust setups BY FAR!
TB..lol yeah an 80mm..that's not much larger than stock incase you dont' know alot of ppl go alot bigger on TB's
suspension..yep I got some decent suspension mods but am also lacking alot of things most ppl use to get into the 10's such as QA1's...my suspension is far from impressive I assure you
Moser 12 bolt with 3.90's..yep about my most useful mod I have I must admit
anything else you ******** THINK you know about my car that I can help you understand?
#67
#68
Banned
iTrader: (4)
Join Date: Feb 2011
Location: Hinesville GA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Kinda funny that someone with a mile long mod list is talking big about beating up on pulley only/bolt on cars.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
Not to say anything bad about Hio's car becuase he has a bad *** setup but he also has and engine swap, weight reduction..ect..I could go on but yes his setup is VERY well put together. I agree that my car is'nt as fast as it should be and it has been the story of my life since I have owned it. I have had my late nights of trying to fix it's many small problems as well as my tuner giving it his all but ulimately it leads to my current suspension setup is'nt dialed in. My cam is also very very not so good for a boosted setup (not sure what part of that you have yet to understand since i have mentioned it already) I have a cam in mind I want to put in but have a family and have to take my time slapping parts on this thing.
this whole bitching back and forth ulitmately leads to the fact you got offended that I was telling the OP (NOT YOU) that I too beat Termi's alot.
you took it upon yourself to make a comment to me about my car being slow for it's mods.
at the end of the day that makes you the *******, not me
#69
Banned
iTrader: (4)
Join Date: Feb 2011
Location: Hinesville GA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Not even sure why my GM loving *** gets on LS1tech , only to get ganged up on by a bunch of Ford Nuttswingers that dont' belong here..it's whatever. I'm off to bed..might have to beat up on some more Termi's tomorrow and I need my rest. Good day ******* # 1, and ******* # 2...
#70
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
I cut all your rambling insults and excuses out so that you can see the core of what you posted.
Just wanted you to see that all I did was point out what you already knew.
And for that I am the *******.
Last edited by Heater; 12-19-2011 at 01:06 AM.
#71
10 Second Club
Thread Starter
iTrader: (8)
Kinda funny that someone with a mile long mod list is talking big about beating up on pulley only/bolt on cars.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
Ilovechevy, these guys are hard on everyone. I've had some ls guys give me more **** than the Ford guys. Wait till the Mopar guys chime in, it's nothing but a complete **** storm then
#72
10 Second Club
iTrader: (10)
Kinda funny that someone with a mile long mod list is talking big about beating up on pulley only/bolt on cars.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
I can at least give Hio some props; instead of throw a **** ton of parts on his car and hoping it runs good...he has actually thought his **** out and it runs good for NO POWER ADDER.
#73
10 Second Club
Thread Starter
iTrader: (8)
Ok guys here's a little vid of me rollin threw the gears in my car. Stoppy, you were wondering about a faceplated gearbox in another thread. Here's ya a good look .
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Also notice it's not gutted and not a rattle trap. But also take a good look at the shift ****
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Also notice it's not gutted and not a rattle trap. But also take a good look at the shift ****
#74
10 Second Club
iTrader: (41)
Ok guys here's a little vid of me rollin threw the gears in my car. Stoppy, you were wondering about a faceplated gearbox in another thread. Here's ya a good look .
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Also notice it's not gutted and not a rattle trap. But also take a good look at the shift ****
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Also notice it's not gutted and not a rattle trap. But also take a good look at the shift ****
#76
Banned
iTrader: (4)
Join Date: Feb 2011
Location: Hinesville GA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
I hear you man. It just pisses me off that some ppl think (not saying you , but others) that with cars it's always A mods + B mods= C performance. That's not always the case. some LS1 car's can make 310 RWHP on a dyno with everything on the car being 100% factory , while others may only make 280 RWHP stock. This has been seen in many cars, what works good on one car, may not work as well on another. I also have mine tuned to be a daily driver (I litterally told my tuner "dude, tune this car to be an awseome daily driver!" ) He did what I asked and I drive this car everyday without a hiccup or a 2nd thought on where I should or should'nt drive it. I think it's very ignorrant of these guys to jump on me saying my car is slow for it's mods ( if 11.1 with a 1.5 60ft is slow?) yet when I try to give them the rundown of why my car run's like it does (crappy cam, DD tune..ect) they wanna call it excuses. I got no reason to make excuses lol, especially to mustang owners..hell, all I have up on my youtube channel is me beating mustangs ( a few boosted ones too). If I had recorded every mustang that I have beaten then Youtube would've shut me down for uploading too many vids lol. They say my car is slow for it's mods?...hmmm ..ok. The Ford GT was like 160+k$ or more and only run's low 11's. The Buggati Veryron has 1000hp and 4 turbos with a 16 cyl engine and only run's 10's and cost over a million dollars, but yet I get called the guy with too many mods that runs too slow for having a P1 procharger, baby cam,, smallish stall, and mid tube headers with cats still on it ??..FML lol
#77
Banned
iTrader: (4)
Join Date: Feb 2011
Location: Hinesville GA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Why cant' you just admit the only reason you even fucked with me with smart *** comments from the get go was because I meantioned I beat up on ( your precious) Termi's all the time. I know it must upset you that a DOHC ford V8 that came factory being forged and having 8lbs of boost, and only made around 400hp, and 3.55 gears only ran low 12's (with a damn good driver) from the factory get's it's *** raped on a most common daily basis. It's okay tho man..we cant' win them all.
#78
#79
TECH Enthusiast
Join Date: Aug 2010
Location: New Hampshire
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Ok guys here's a little vid of me rollin threw the gears in my car. Stoppy, you were wondering about a faceplated gearbox in another thread. Here's ya a good look .
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Also notice it's not gutted and not a rattle trap. But also take a good look at the shift ****
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Also notice it's not gutted and not a rattle trap. But also take a good look at the shift ****
#80
Teching In
[QUOTE=HioSSilver;15745783]Ok guys here's a little vid of me rollin threw the gears in my car. Stoppy, you were wondering about a faceplated gearbox in another thread. Here's ya a good look .
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Thanks for posting this, was wondering how it worked in real life.
It spun some in 1st too.
http://youtu.be/6eYfQjBLzqk
Thanks for posting this, was wondering how it worked in real life.