Finally ran a new 5.0 ......and lost !
#1
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: California Bay Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So I finally ran a new 5.0 this Sunday . Needless to say it didn't go my way ! Even though I lost I'm just glad I finally got a run with one so it's all good !
Took forever to get a descent race with him , I tried to get a 50 roll but he slows to 30 mph and jumps the gun or traffic got in the way the first 2 attempts, finally get a clear spot to run and he wants to practically come to a dead stop rollin at like 5/10 mph and I don't go for it ,way dangerous on a highway so I stay at 20 (still dangerous !) and motion for him to come up and get even , he does and I honk it off . He get's the initial hit ,but I'm not saying he jumped the gun and I get a little bit of wheelspin ,nothing major and kept my front bumper right at his rear fender till 125 where I let off. He kept on the gas and put's his hazard's on ,lol !
Got to the spot where everyone was meeting and found out from a mutual friend that it had a tune , Boss intake and manifold and factory headers . Figured it had something when I saw the Livernois Motorsports plate on it !
He had no passenger I had one that couldn't be more than 140 so it doesn't really matter and I'm guessing it had 3.73s as well because he seemed to shift exactly when I would but neither of us would fall back or lose pace after shifting !
Long story I know , Sorry !
Took forever to get a descent race with him , I tried to get a 50 roll but he slows to 30 mph and jumps the gun or traffic got in the way the first 2 attempts, finally get a clear spot to run and he wants to practically come to a dead stop rollin at like 5/10 mph and I don't go for it ,way dangerous on a highway so I stay at 20 (still dangerous !) and motion for him to come up and get even , he does and I honk it off . He get's the initial hit ,but I'm not saying he jumped the gun and I get a little bit of wheelspin ,nothing major and kept my front bumper right at his rear fender till 125 where I let off. He kept on the gas and put's his hazard's on ,lol !
Got to the spot where everyone was meeting and found out from a mutual friend that it had a tune , Boss intake and manifold and factory headers . Figured it had something when I saw the Livernois Motorsports plate on it !
He had no passenger I had one that couldn't be more than 140 so it doesn't really matter and I'm guessing it had 3.73s as well because he seemed to shift exactly when I would but neither of us would fall back or lose pace after shifting !
Long story I know , Sorry !
#3
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: California Bay Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If a rematch happens it probably would be a similar result cause it was an even start and I only let off cause I don't really like going into 5th and trying to push it till 150 in a race ! Don't think I would of pulled on him and it didn't look like he was going anywhere either !
#4
TECH Fanatic
iTrader: (16)
Join Date: Oct 2006
Location: Currently In suspense.
Posts: 1,783
Likes: 0
Received 1 Like
on
1 Post
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Deffinately a honorable death, sounds like he was m6 w/ driver mod too? I'm thinking your car has the parts to pull a 5.0 plus him getting the hit at your level really starts to make a big difference. No matter on the details its typical street race.
Its funny how you can tell when other cars want to start the race off in their sweet spot over being relatively safe. I don't slow down on the freeway like that other drivers will get pissed, and call you in.
Its funny how you can tell when other cars want to start the race off in their sweet spot over being relatively safe. I don't slow down on the freeway like that other drivers will get pissed, and call you in.
#5
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: California Bay Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You aint kidding ! Witnessed that before and also heard my car along with some others reported over the police scanner ! Definitely going to try and play it safe and be a little smarter this year ! Lot's of horror stories lately , not trying to be the next one ! He definitely wanted to go at his preffered speed . Definitely a m6 and he had no issues shifting from what I could see.(front end would barely move/drop when he shifted )He would not go from 50 at all and I really wanted to run it so I took the bait !
Last edited by BayArea ws6; 04-04-2012 at 03:54 AM.
Trending Topics
#8
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If his car has that many mods then it was definitely a good death.
I don't approve of putting your hazzard lights on after a win; especially if you are racing a stranger.
I don't approve of putting your hazzard lights on after a win; especially if you are racing a stranger.
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i agree you should have pulled him fairly well. By the sounds of it, he has a stock exhaust system with a tune and boss intake manifold. Probably a 115mph car. I would hope your setup is more potent then that
#13
TECH Veteran
iTrader: (31)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know my dads 5.0 with al driveshaft and 3.73's M6 from a 60 roll against my cam only ta. I give him the hit and had a car on him by 120. It takes quite a bit to overcome the hit. So if he did get a small jump and you trap 5mph higher it will be a sloww pull back around him. Either way the race happened and we seen it on vid, so don't know what to tell ya.
#14
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Good run. A 50 roll is a bad spot for his gearing if he had 3.73's. He should trap between 115-118 depending on where he has shift points and DA etc. Simply comparing to mine and other cars with same basic mods. They range to where racing at. As said between 116-118. Maybe he had an off road x pipe also that help him gain decent whp for such simple bolt on.
#16
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: California Bay Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Trapped 112 with shitty tires and a soft launch last time at the track.My friend who has similar mods beside's stock heads,fast 102 with ms3 cam,big stall and spray traps about 120 on dr's if I recall at the same track .Considering that I pretty much hung right next to him after the initial wheelspin from 20 to 125 I think it was a pretty even race.Neither of us would really gain any ground between shifts .I didnt miss a shift and neither did he so driver mod wasnt it.If it was from a dig than that would definitely come into play but not so much from a roll . Ohioborn80 why is a 50 roll so bad ? seems fine for me with 373s . Evangto87 I should of have just said midlength headers my bad.someone there was telling me they came with headers so that threw me for a loop.Sounds fishy to me , never heard of a car with headers off the showroom floor. Necrocannibal I can't explain my numbers they were on a stingy dynapack and they are the sae corrected numbers. Made about 430 hp and 413 tq uncorrected from what I recall .
Last edited by BayArea ws6; 04-04-2012 at 02:39 PM.
#17
Banned
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Both you and you friends cars trap an incredibly low MPH. Just the other day on here a cam only setup trapped 121 with full interior... For a H/C/I and spray to trap less than that is embarrassing. Your trap speed is 1mph more than what a friend trapped in his Lid/ported TB full interior ss. So yeah.
#18
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Trapped 112 with shitty tires and a soft launch last time at the track.My friend who has similar mods beside's stock heads,fast 102 with ms3 cam,big stall and spray traps about 120 on dr's if I recall at the same track .Considering that I pretty much hung right next to him after the initial wheelspin from 20 to 125 I think it was a pretty even race.Neither of us would really gain any ground between shifts .I didnt miss a shift and neither did he so driver mod wasnt it.If it was from a dig than that would definitely come into play but not so much from a roll . Ohioborn80 why is a 50 roll so bad ? seems fine for me with 373s . Evangto87 I should of have just said midlength headers my bad.someone there was telling me they came with headers so that threw me for a loop.Sounds fishy to me , never heard of a car with headers off the showroom floor. Necrocannibal I can't explain my numbers they were on a stingy dynapack and they are the sae corrected numbers. Made about 430 hp and 413 tq uncorrected from what I recall .
#19
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: California Bay Area
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Friends car has stock heads.Ran a 10.9 best run at 126 a while back on 100 shot with the nano kit.Actually just got a text from him and the guy with the 5.0 wants to run again.Ill try to get it filmed but I dont want to roll with a passenger.lol.I imagine by the time it happens he will do something else to the car and its gonna be even worse for me ! We will see what happens ! Not worried about it !