intake only 2006 GTO vs eaton swapped Mach 1 **VID**
05-17-2012, 02:59 AM
#1183
Teching In
iTrader: (2)
Join Date: May 2007
Location: Socal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Dude bring your **** mach to cali and I will introduce you some Bolt on geared LS1's that would drag your **** from a dig for no less then $1000. Your car is nothing special get over it. Your car has no ***** its all gear and slicks. You must not race alot because you talk more **** then anyone I know. And a guy with a mid 12 second car at 108 cant possibly talk that much **** around here without getting called out....
05-17-2012, 03:10 AM
#1185
Teching In
iTrader: (2)
Join Date: May 2007
Location: Socal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Ill just leave this here....
Again
and Again
and Again....
http://www.youtube.com/watch?v=Hs_AT11tUzI
http://www.youtube.com/watch?v=lhYcU6KuWM8
Again
and Again
and Again....
http://www.youtube.com/watch?v=Hs_AT11tUzI
http://www.youtube.com/watch?v=lhYcU6KuWM8
05-17-2012, 06:57 AM
#1186
9 Second Club
iTrader: (7)
Join Date: May 2005
Location: Cabot, AR
Posts: 3,126
Likes: 0
Received 0 Likes
on
0 Posts
I went faster than both of you, with only 2 parts changed..headers and cai. Stock tire, stock 3.27 gears, stock converter, heavier car. And I did it without great air or drag times correction.....da on that pass was 1185. Why are you guys on ls1tech again? It always seems the only ford regulars here are the idiots that are shunned by their own...lol.
05-17-2012, 06:59 AM
#1187
9 Second Club
iTrader: (7)
Join Date: May 2005
Location: Cabot, AR
Posts: 3,126
Likes: 0
Received 0 Likes
on
0 Posts
Hey Stopsign, you are east coast, I am central us.....lets meet halfway, Ill drive mine, you drive yours, throw some money on it, and get a vid for this thread. Im down, Its worth my time and gas money to take your money and shut you up bitch boy.
05-17-2012, 08:55 AM
#1189
Banned
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I went faster than both of you, with only 2 parts changed..headers and cai. Stock tire, stock 3.27 gears, stock converter, heavier car. And I did it without great air or drag times correction.....da on that pass was 1185. Why are you guys on ls1tech again? It always seems the only ford regulars here are the idiots that are shunned by their own...lol.
Last edited by automach1; 05-17-2012 at 09:09 AM.
05-17-2012, 09:04 AM
#1190
Teching In
Join Date: May 2009
Location: bourbonnais ill
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
So a 2010 Camaro needed two mods to beat a 2003 mach with tires,gears and a tune ? Wow that's impressive , what I do not understand is how does a eaton swapped mach not run better than a stock cobra would?
05-17-2012, 10:02 AM
#1191
TECH Enthusiast
Join Date: Aug 2010
Location: New Hampshire
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to SR&K, the **** talkers are the biggest back peddlers.
~edit~
My guess is rebuttles will be as follows "Why am i gonna waste my time and money driving half way across the country to wax the floor with your ***."
Or "Why would I spend time and money going to race something with WAY more mods them me."
Last edited by ZFreie; 05-17-2012 at 10:10 AM.
05-17-2012, 10:26 AM
#1192
11 Second Club
Join Date: Aug 2005
Location: Tampa, FL
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
05-17-2012, 10:55 AM
#1195
My god this thread delivers!
Here is what i see so far-
Post up video after video after video of what a typical bolt on Mach runs-
Mach owners dont like that, call you a ***- Butthurt commences
Mach1 w/ forced induction gets beat a GTO with intaketune only, butthurt commences and come to its defence. Obviously the car was poorly driven, even though they raced 3+ times, with the same results. I dont hear any lag between shifts on the Mach1, but what do i know.
Then ******** tries to make fun of me because i have my future mods listed in my sig, whitch are sitting sitting on my shelf, waiting on pushrods and a tune to finish it up.
So basically what im getting from this is Mach 1`s are slow, but they will try and talk so much **** about everyone elses cars, no matter what it is, that way noone can focus on how slow there cars actually are? Sound about right?
Here is what i see so far-
Post up video after video after video of what a typical bolt on Mach runs-
Mach owners dont like that, call you a ***- Butthurt commences
Mach1 w/ forced induction gets beat a GTO with intaketune only, butthurt commences and come to its defence. Obviously the car was poorly driven, even though they raced 3+ times, with the same results. I dont hear any lag between shifts on the Mach1, but what do i know.
Then ******** tries to make fun of me because i have my future mods listed in my sig, whitch are sitting sitting on my shelf, waiting on pushrods and a tune to finish it up.
So basically what im getting from this is Mach 1`s are slow, but they will try and talk so much **** about everyone elses cars, no matter what it is, that way noone can focus on how slow there cars actually are? Sound about right?
05-17-2012, 12:08 PM
#1197
12 Second Club
iTrader: (10)
Join Date: Jan 2009
Location: 5.0
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
I went faster than both of you, with only 2 parts changed..headers and cai. Stock tire, stock 3.27 gears, stock converter, heavier car. And I did it without great air or drag times correction.....da on that pass was 1185. Why are you guys on ls1tech again? It always seems the only ford regulars here are the idiots that are shunned by their own...lol.
05-17-2012, 12:26 PM
#1198
9 Second Club
iTrader: (7)
Join Date: May 2005
Location: Cabot, AR
Posts: 3,126
Likes: 0
Received 0 Likes
on
0 Posts
I've beat 5.0s too. And u can get ur **** beat too disco, ur the biggest back peddler of them all. U won't even post a slip, u just talk ****. U can come halfway and get some of this too for some cash. Want some? Get your baby cammed ls1 ripped on the street.
