300 Shot 408 C5 Z06 vs 200 Shot 427 C6 Z06
02-18-2014, 07:26 PM
#64
Staging Lane
Join Date: Sep 2006
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
No I haven't they also don't make a multi-step retard for LS motors so I have to pull all the timing out at once. I'm pulling 4* out of the computer and 11* with my timing controller which is the LNC-2000 and is also a launch controller but I don't have it wired in for launch.
Last edited by DSS; 02-18-2014 at 07:41 PM.
02-18-2014, 07:36 PM
#66
Staging Lane
Join Date: Sep 2006
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
i was replying that LNC-2000 to wire the launch controller is easy,
no experience with that stuff my self but i did look into it for a while, its a very solid simple multiple stage controller but correct me if im wrong but you still need to pair it with LNC-2000 to pull timing atleast for 1 stage,
to my knowledge, there is no all in one timing controller and nitrous activation controller in one single piece
to my knowledge, there is no all in one timing controller and nitrous activation controller in one single piece
Last edited by DSS; 02-18-2014 at 07:42 PM.
02-18-2014, 08:08 PM
#67
On The Tree
iTrader: (4)
Join Date: Feb 2010
Location: Austin Texas
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
i was replying that LNC-2000 to wire the launch controller is easy,
no experience with that stuff my self but i did look into it for a while, its a very solid simple multiple stage controller but correct me if im wrong but you still need to pair it with LNC-2000 to pull timing atleast for 1 stage,
to my knowledge, there is no all in one timing controller and nitrous activation controller in one single piece
no experience with that stuff my self but i did look into it for a while, its a very solid simple multiple stage controller but correct me if im wrong but you still need to pair it with LNC-2000 to pull timing atleast for 1 stage,
to my knowledge, there is no all in one timing controller and nitrous activation controller in one single piece
02-18-2014, 08:57 PM
#68
Staging Lane
Join Date: Sep 2006
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
maybe the words you used made it confusing to what your trying to say but NCC-001 the controller it self does not control "timing" as in ignition timing, another device is needed for that like LNC-2000 which can only pull 1 preset "timing" with a ramp rate feature, but as a nitrous activation controller the NCC-001 does have a progressive rate feature to activate the solenoids on 2 stages,
Last edited by DSS; 02-18-2014 at 09:09 PM.
