03 cobra vs cam/fast ls1
08-16-2014, 10:03 PM
#1
Teching In
Thread Starter
Join Date: Sep 2008
Location: Westland, MI
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
03 cobra vs cam/fast ls1 Ran my coworker today who has an '02 ss m6, trex cam with stock heads and a fast 90 intake/tb, longtubes with open cutout and 9" with 4.11's. My car has the mods in the sig. Mine made 501/501 whp/tq and his made 421whp(forget the torque) and they were ran on the same dyno, but different days.
We did 2 45ish rolls, both in 2nd gear. First race he tapped the limiter on one of his shifts so I pulled about 3 solid cars on him. Second race was clean from both of us, he pulled a little thru 2nd, I pulled back ahead by a half car or so by the end of third, then by the end of 4th I had probably about 2 solid cars on him. Was some good runs. His car being stock heads it ran better than I expected, it's also full weight plus the 9".
Here's vids, I had the damn camera pointed the wrong way as we were expecting it to be a bit tighter, but it always seems that when I point the camera forward I always win so sometimes I do that on purpose haha. Enjoy...
We did 2 45ish rolls, both in 2nd gear. First race he tapped the limiter on one of his shifts so I pulled about 3 solid cars on him. Second race was clean from both of us, he pulled a little thru 2nd, I pulled back ahead by a half car or so by the end of third, then by the end of 4th I had probably about 2 solid cars on him. Was some good runs. His car being stock heads it ran better than I expected, it's also full weight plus the 9".
Here's vids, I had the damn camera pointed the wrong way as we were expecting it to be a bit tighter, but it always seems that when I point the camera forward I always win so sometimes I do that on purpose haha. Enjoy...
08-16-2014, 10:19 PM
#2
7 Second Club
Good runs!
Expected results.
Expected results.
Trending Topics
08-17-2014, 05:33 AM
#12
Teching In
Thread Starter
Join Date: Sep 2008
Location: Westland, MI
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
08-17-2014, 06:26 AM
#14
08-17-2014, 06:44 AM
#15
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
Good run Colin! As expected my friend 
Just to give you guys a little background here: This car made 421 rwhp to my 396 rwhp on the same dyno...on the same day as well. He has a better intake, bigger cam, and is around 100 lbs lighter than me. The only thing i have over him is heads. Yet despite the dyno numbers difference I'm a much closer race with ctgreddy. Again proving that dyno numbers don't mean crap...even if you can't make sense of it for whatever reason lol
Just to give you guys a little background here: This car made 421 rwhp to my 396 rwhp on the same dyno...on the same day as well. He has a better intake, bigger cam, and is around 100 lbs lighter than me. The only thing i have over him is heads. Yet despite the dyno numbers difference I'm a much closer race with ctgreddy. Again proving that dyno numbers don't mean crap...even if you can't make sense of it for whatever reason lol
08-17-2014, 07:11 AM
#16
10 Second Club
iTrader: (8)
How am I but hurt?
Heads should suffice. A little less gear would help the camaro too on the roll.
08-17-2014, 07:14 AM
#17
It depends.....The way I figure it if ct's blower was not ported then yes he would get beat by a cam only car. But since his blower is ported it probably takes a h/c car if both are at full weight.
How am I but hurt?
Heads should suffice. A little less gear would help the camaro too on the roll.
How am I but hurt?
Heads should suffice. A little less gear would help the camaro too on the roll.
08-17-2014, 09:16 AM
#19
Banned
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Not good.