Street Racing & Kill Stories Basic Technical Questions & Advice

Whipple 5.0 vs Procharged 5.0

Thread Tools
 
Search this Thread
 
Old 07-02-2018 | 06:14 PM
  #21  
ZNix's Avatar
On The Tree
iTrader: (1)
 
Joined: Apr 2010
Posts: 193
Likes: 15
From: Plympton, MA
Default

Killt it!
Old 07-03-2018 | 05:01 AM
  #22  
OneSlowV's Avatar
TECH Regular
iTrader: (2)
 
Joined: May 2013
Posts: 406
Likes: 218
From: East Texas
Default

Good kill man ! I’m still looking for a 2018 5.0 and 6th gen put the gap on lol
Old 07-03-2018 | 10:44 AM
  #23  
MACHXLR8's Avatar
Teching In
 
Joined: Dec 2006
Posts: 1
Likes: 2
From: North Carolina
Default

Originally Posted by UltraZLS1
He just beat an 03 cobra making 520/590 pretty convincingly. Maybe he will post it
I saw that race with the 03 Cobra on Youtube. What I cant understand is how he ran him down on the big end since the Cobra is putting down more Hp/Trq and I believe is a little lighter in weight. Not sure if the DA played a part or was the Cobra not really putting that kind of power down. From what I read, the Cobra was still on the stock Heaton so those numbers might be a little high.
Old 07-03-2018 | 10:53 AM
  #24  
UltraZLS1's Avatar
TECH Fanatic
iTrader: (13)
 
Joined: Dec 2004
Posts: 1,264
Likes: 55
From: Hanover, Michigan
Default

Originally Posted by MACHXLR8
I saw that race with the 03 Cobra on Youtube. What I cant understand is how he ran him down on the big end since the Cobra is putting down more Hp/Trq and I believe is a little lighter in weight. Not sure if the DA played a part or was the Cobra not really putting that kind of power down. From what I read, the Cobra was still on the stock Heaton so those numbers might be a little high.
it has some type of chiller system don’t know how much it helps.

bolt on 6g manual beat him about the same.


They both claim to have seen the dyno sheet so idk. The cobra is a manual so there’s that. The shifts look decent enough but maybe too early or something
Old 07-03-2018 | 11:11 AM
  #25  
BlkMach1's Avatar
Thread Starter
Teching In
 
Joined: May 2010
Posts: 36
Likes: 116
From: S. Fla.
Default

Cobras need TVS blower at stock weight to be serious competitors with new tech.
Old 07-03-2018 | 11:46 AM
  #26  
MACHXLR8's Avatar
Teching In
 
Joined: Dec 2006
Posts: 1
Likes: 2
From: North Carolina
Default

Originally Posted by BlkMach1
Cobras need TVS blower at stock weight to be serious competitors with new tech.
I can sort of agree with this but still the "claimed" Hp/Trq of the Cobra was there with his current setup. It was not lacking for power by any means.

For the race between the 2018 and 03 Cobra, when both were at their final gear, the lighter car with more Hp/Trq should not get pulled.
The Cobra had an approximate Hp/lbs ratio of ~520/3650=.1424 where the 2018 has a ratio of ~475/3700=.1283
Just having a hard time with that since the number tell a different story. The claimed numbers seem a bit high for the Cobra especially since he still has the stock Eaton. If I had to estimate, that Cobra is not making more than 460Hp.
Just my humble opinion but I could be wrong.
Old 07-03-2018 | 11:47 AM
  #27  
swapped3vgt's Avatar
Teching In
 
Joined: Jan 2013
Posts: 1
Likes: 0
From: miami fl
Default

Originally Posted by MACHXLR8
I saw that race with the 03 Cobra on Youtube. What I cant understand is how he ran him down on the big end since the Cobra is putting down more Hp/Trq and I believe is a little lighter in weight. Not sure if the DA played a part or was the Cobra not really putting that kind of power down. From what I read, the Cobra was still on the stock Heaton so those numbers might be a little high.
The cobra jumped on the second run there was a misunderstanding on the honk countdown and he went on two , but yeah the stock eaton system isnt very productive and heat soaks after a few runs we stop before the runs and he filled the reservoir tank with cold ice . once the weather improves some down here with colder temps we will rerun
Old 07-03-2018 | 11:55 AM
  #28  
swapped3vgt's Avatar
Teching In
 
Joined: Jan 2013
Posts: 1
Likes: 0
From: miami fl
Default

Originally Posted by SoFla01SSLookinstok
Tried calling out a while back. When had the 5.0 on spray. Think before I met you & that's how I met you lol. Never a response. No biggie.
hey dude what's going , carlos mentioned that you are down for some runs so lets make it happen , could you do like a 35 roll ? then i'll do whichever roll you want .
Old 07-03-2018 | 01:13 PM
  #29  
SoFla01SSLookinstok's Avatar
11 Second Club
 
Joined: Mar 2012
Posts: 1,541
Likes: 15
From: South Florida
Default

Originally Posted by swapped3vgt
hey dude what's going , carlos mentioned that you are down for some runs so lets make it happen , could you do like a 35 roll ? then i'll do whichever roll you want .
Hey buddy. Sure man.. your car runs strong. Bit busy now but when free will let Carlos know & we'll set a meet up. Sure. That's fine. Think it's a good idea to go from your strong point then my strong point to see if any difference. 35mph is good. My strongest point is about 40-45mph.
Old 07-03-2018 | 01:36 PM
  #30  
swapped3vgt's Avatar
Teching In
 
Joined: Jan 2013
Posts: 1
Likes: 0
From: miami fl
Default

Originally Posted by SoFla01SSLookinstok
Hey buddy. Sure man.. your car runs strong. Bit busy now but when free will let Carlos know & we'll set a meet up. Sure. That's fine. Think it's a good idea to go from your strong point then my strong point to see if any difference. 35mph is good. My strongest point is about 40-45mph.
Cool bro sounds good , should be fun runs can't wait to see your car putting work .
Old 07-03-2018 | 03:07 PM
  #31  
Mike Morris's Avatar
TECH Fanatic
10 Year Member
iTrader: (55)
 
Joined: Mar 2010
Posts: 1,639
Likes: 68
From: Md/PA/FL
Default

Why don't you guys do digs?


I have killer chiller on my fox. Works great with aftercooler. Aftercooled killed boost psi doe
Old 07-03-2018 | 03:13 PM
  #32  
Prototype007's Avatar
Launching!

iTrader: (2)
 
Joined: Oct 2007
Posts: 252
Likes: 34
From: Kentucky
Default

Good runs
Old 07-03-2018 | 05:38 PM
  #33  
BlkMach1's Avatar
Thread Starter
Teching In
 
Joined: May 2010
Posts: 36
Likes: 116
From: S. Fla.
Default

Originally Posted by Mike Morris
Why don't you guys do digs?


I have killer chiller on my fox. Works great with aftercooler. Aftercooled killed boost psi doe
it was cloudy, sun didn’t really come up, so road was still damp, right lane being worse than left. Took us about 7-8 tries to get those clean runs. Digs would’ve been a bad idea, also adding that people on that road are normally going 80+mph.



Quick Reply: Whipple 5.0 vs Procharged 5.0



All times are GMT -5. The time now is 05:04 PM.