Epic SRK B/S thread of 2019
#6082
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
lol
#6085
Launching!
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It had all the bolt ons available at the time besides a stock tb and stock intake manifold. Rear turbo was dying at that point.
11.52 @ 122 mph on with port injection E85 for 2019.
11.58 @ 120 mph on 93 for 2018. Tried 110 fuel and first pass I broke the teeth off the ring gear.
Slip says 1.50 60’, but it’s a bit debatable since ALL of my 60’ times have never been better than 1.61 on 93 or E85.
11.52 @ 122 mph on with port injection E85 for 2019.
11.58 @ 120 mph on 93 for 2018. Tried 110 fuel and first pass I broke the teeth off the ring gear.
Slip says 1.50 60’, but it’s a bit debatable since ALL of my 60’ times have never been better than 1.61 on 93 or E85.
#6086
The following users liked this post:
S8ER95Z (03-03-2020)
#6089
TECH Resident
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It had all the bolt ons available at the time besides a stock tb and stock intake manifold. Rear turbo was dying at that point.
11.52 @ 122 mph on with port injection E85 for 2019.
11.58 @ 120 mph on 93 for 2018. Tried 110 fuel and first pass I broke the teeth off the ring gear.
Slip says 1.50 60’, but it’s a bit debatable since ALL of my 60’ times have never been better than 1.61 on 93 or E85.
11.52 @ 122 mph on with port injection E85 for 2019.
11.58 @ 120 mph on 93 for 2018. Tried 110 fuel and first pass I broke the teeth off the ring gear.
Slip says 1.50 60’, but it’s a bit debatable since ALL of my 60’ times have never been better than 1.61 on 93 or E85.
#6095
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So I purposely made the engine over heat and lose oil pressure? Please explain that.
I had new bearings installed l, new cam and all other supporting mods to go along with it.
so I purposely destroyed the 60e? Please explain.
I had the 60e rebuilt before the new mods and was told it was good and even had a warranty on it. Warranty expired though.
I purposely made the rear end possibly going out? Please explain.
I've bought all the known upgrades that make it last in the 10s range and even had a shop that's well known for axel work all over the country do it.
So you explainations better be good cause clearly you just tryn to troll.
#6098
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I did?
So I purposely made the engine over heat and lose oil pressure? Please explain that.
I had new bearings installed l, new cam and all other supporting mods to go along with it.
so I purposely destroyed the 60e? Please explain.
I had the 60e rebuilt before the new mods and was told it was good and even had a warranty on it. Warranty expired though.
I purposely made the rear end possibly going out? Please explain.
I've bought all the known upgrades that make it last in the 10s range and even had a shop that's well known for axel work all over the country do it.
So you explainations better be good cause clearly you just tryn to troll.
So I purposely made the engine over heat and lose oil pressure? Please explain that.
I had new bearings installed l, new cam and all other supporting mods to go along with it.
so I purposely destroyed the 60e? Please explain.
I had the 60e rebuilt before the new mods and was told it was good and even had a warranty on it. Warranty expired though.
I purposely made the rear end possibly going out? Please explain.
I've bought all the known upgrades that make it last in the 10s range and even had a shop that's well known for axel work all over the country do it.
So you explainations better be good cause clearly you just tryn to troll.
Mistake #1. Trying to make a 4L60 last. Lol.
The following 2 users liked this post by AnnivSS:
2010CamaroS (03-03-2020), S8ER95Z (03-03-2020)
#6100
TECH Enthusiast