Epic SRK B/S thread of 2019
#6542
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is what happens when gm doesn't run some retarded heavy big clutch and long *** gears.
#6543
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
#6544
Teching In
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think getting a all motor 4.8 in a f body to run 11's would be tough, not saying a 302 would do any better, just think they might be close. I could be wrong, I don't know much about the 302's.
#6547
Teching In
#6548
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The 4.8 doesn't make significantly less power than the 5.3. I would assume with the right setup in the right fbody, it wouldnt be that hard.
#6549
TECH Enthusiast
#6550
7 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Had a break in the weather, so I found a quiet spot in Mexico to test White Whale © on a 40 roll. Seems that I need a bit more than a 50F dusty road to get a clean pull. But I got some decent data to go forwards with.
#6551
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I would image either could. The 30p00 may not like it for long sbe. Getting the compression up to get there would be the issue sbe for both.
Yup....same bore just shorter stroke. The 4.8 likes rpm.
probably 400 crank. Most end up around 300whp with good builds being 350whp~. They still kinda gutless there tho pulling out the back.
probably 400 crank. Most end up around 300whp with good builds being 350whp~. They still kinda gutless there tho pulling out the back.
#6552
TECH Enthusiast
#6553
Teching In
The following users liked this post:
NW-99SS (04-02-2020)
#6559