Epic SRK B/S thread of 2019
#1222
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks snake.
I drove it better and only turned it 5800-6k. The ic pump definitely helped, the surging was gone. Those shocks are much better to but it's hard to really make them do much on 10+yr old dr's. If had a tire machine i woulda put my bias tires on it . I might buy one here soon.
You know it takes off really level as it is. The springs are pretty stiff on it.
I'll put a vid together of it here soon.
I drove it better and only turned it 5800-6k. The ic pump definitely helped, the surging was gone. Those shocks are much better to but it's hard to really make them do much on 10+yr old dr's. If had a tire machine i woulda put my bias tires on it . I might buy one here soon.
You know it takes off really level as it is. The springs are pretty stiff on it.
I'll put a vid together of it here soon.
#1223
11 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice run hiho! That's the car, of yours, I'd want to run. Of coarse not from a dig. You & I know I'd loose on that.
It's cool you can see your shifts on the draggy speed chart. But.. What good is a draggy at the track?? Yes it has been tested at the track and is very close. Only .02 off on your 1/8 & 1/4 times. I will bet you will not get those times on the street though. So what good is that thing on the street? For roll speed/times?
PS. Nice runs also for Mac. Got an 11sec ride! I'd say anyway.
It's cool you can see your shifts on the draggy speed chart. But.. What good is a draggy at the track?? Yes it has been tested at the track and is very close. Only .02 off on your 1/8 & 1/4 times. I will bet you will not get those times on the street though. So what good is that thing on the street? For roll speed/times?
PS. Nice runs also for Mac. Got an 11sec ride! I'd say anyway.
#1224
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just wanted to test the dragy for my self to confirm it's accuracy. Now i can be confident in testing changes. I posted dragy street in the notch in the dragy thread.
Be nice to crisp the shifts up a little....i really don't like the pro 5.0 shifter in it. It's notchy af. I was talking to another guy there with a vmp coyotah notch that had a magnum 6060 i think he said. Anyway he has a pro 5.0 in it and said it's bad notchy to.
Does anyone know if a f car shifter fits a cobro t56?
Be nice to crisp the shifts up a little....i really don't like the pro 5.0 shifter in it. It's notchy af. I was talking to another guy there with a vmp coyotah notch that had a magnum 6060 i think he said. Anyway he has a pro 5.0 in it and said it's bad notchy to.
Does anyone know if a f car shifter fits a cobro t56?
#1229
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
From the looks of it i was pretty successful. That means your dumbass looks like a fool for whining on som6you thought was there.....getting corrected .....then continuing to whine.
That really breaks they heart mmmmm.
It has stock seats in it now.
You made a stupid comment and got corrected.
So a drag pack isn't intentional. ****** thing just fell out of the sky and installed itself on yo car.
Those aluminum heads are actually faux aluminum i guess.
I'm sure you're exhaust is heavier because that's what they do to aftermarket exhaust.....they make it heavier.
You have no facts and you suck at mustangs.
BTW......the gap on you got larger tonight![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Yea those 10 or so holes in 22g sheet metal really make up for that 60lb of added steel in the chassis. ......idiot
Didn't have road race tires on it.......duh
Ask 62. His 5gen leaves eff'ing hard
That really breaks they heart mmmmm.
It has stock seats in it now.
You made a stupid comment and got corrected.
So a drag pack isn't intentional. ****** thing just fell out of the sky and installed itself on yo car.
Those aluminum heads are actually faux aluminum i guess.
I'm sure you're exhaust is heavier because that's what they do to aftermarket exhaust.....they make it heavier.
You have no facts and you suck at mustangs.
BTW......the gap on you got larger tonight
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Yea those 10 or so holes in 22g sheet metal really make up for that 60lb of added steel in the chassis. ......idiot
Didn't have road race tires on it.......duh
Ask 62. His 5gen leaves eff'ing hard
Good runs in the Notch BTW. Love that car and that color.
#1233
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice run hiho! That's the car, of yours, I'd want to run. Of coarse not from a dig. You & I know I'd loose on that.
It's cool you can see your shifts on the draggy speed chart. But.. What good is a draggy at the track?? Yes it has been tested at the track and is very close. Only .02 off on your 1/8 & 1/4 times. I will bet you will not get those times on the street though. So what good is that thing on the street? For roll speed/times?
PS. Nice runs also for Mac. Got an 11sec ride! I'd say anyway.
It's cool you can see your shifts on the draggy speed chart. But.. What good is a draggy at the track?? Yes it has been tested at the track and is very close. Only .02 off on your 1/8 & 1/4 times. I will bet you will not get those times on the street though. So what good is that thing on the street? For roll speed/times?
PS. Nice runs also for Mac. Got an 11sec ride! I'd say anyway.