Max HP out of a whippled cobra?
#22
Originally Posted by 2001whiteSS6spd
My buddy at work just got his 03 cobra dynoed a week ago. It made 633rwhp and 680rwtq at 19psi with a 2.3L whipple.
#23
Originally Posted by CuNfUzEd
If it is 700rwhp he might be running an intercooler N2O shot. My buddies make 620 and with a 75 dry shot brings him just over 700rwhp.
plumbed into the lower intake manifold? There's no fuel line coming
off the stock rail so there would need to be a stand alone setup.
This engine bay looks damned near stock expect for that Whipple.
I'm not buying 700rwhp.
#24
Originally Posted by unit213
The intercooler is below the blower. You're saying the nitrous kit is
plumbed into the lower intake manifold? There's no fuel line coming
off the stock rail so there would need to be a stand alone setup.
This engine bay looks damned near stock expect for that Whipple.
I'm not buying 700rwhp.
plumbed into the lower intake manifold? There's no fuel line coming
off the stock rail so there would need to be a stand alone setup.
This engine bay looks damned near stock expect for that Whipple.
I'm not buying 700rwhp.
I don't know enough about these cars to know where the plumbing would go. I assumed when my buddy told me a 75 dry shot it was in the intercooler. I obviously assumed incorrect.LOL
#26
Originally Posted by s/c stang
I have a buddy of mine that ran 700+ rwhp on a stock block on race fuel on 22psi...so yes its possible stock or built.
#27
Originally Posted by unit213
You must me 580rwtq...680rwtq isn't happening without nitrous.
#32
Originally Posted by 2001whiteSS6spd
I just looked at his sheet and max torque is 694 which is a spike and it made about 680rwtq. I got some info out of him about the setup, he runs 110 octane gas, 26 degrees total timing, bassani midlenghts, slp loudmouth exhaust, I think it was called plasma ignition module, lightning cams, and a mullet mod. Thats all I can remember.
too.
#35
Originally Posted by unit213
Yeah...that's a 2.3L Whipple. Too bad we can't see the lower pulley or I could
give you a good idea of it's power output. Chances are that it's around 600rwhp.
However, it's very possible to make 700rwhp with one...but it has to be spun
to the moon, have tons of timing, race gas, etc.
give you a good idea of it's power output. Chances are that it's around 600rwhp.
However, it's very possible to make 700rwhp with one...but it has to be spun
to the moon, have tons of timing, race gas, etc.
#36
Originally Posted by 2001whiteSS6spd
I just looked at his sheet and max torque is 694 which is a spike and it made about 680rwtq. I got some info out of him about the setup, he runs 110 octane gas, 26 degrees total timing, bassani midlenghts, slp loudmouth exhaust, I think it was called plasma ignition module, lightning cams, and a mullet mod. Thats all I can remember.
#37
Originally Posted by 98Z28MASS
My buddy ran across a whippled cobra. He took some cell phone camera pics of the guys setup and it def says whipple on the side of the blower but he claimed 700 HP...Not sure if he meant rear wheel or flywheel, but what do most whipples max out at? Also, im not sure if there are different whipple models but here is a pic of his setup.