edged by a formula
Thread Starter
Teching In
Joined: Apr 2007
Posts: 15
Likes: 0
From: round lake beach, IL
edged by a formula my buddy and i were out joyriding in our boulevard cruisers going to a friends house when we decided to get a few runs in. my mods are in my sig and his mods are ::99 NBM M6 Formula
Texas Speed 224 r cam, Prc Stage 2.5 5.3 Heads Milled to 59cc , LS6 Intake, Pacesetter Longtubes, true duals with moroso spirals dumped, UD Pulley, PP Throttle body, slp lid, TR6 Plugs, LS7 Clutch Kit...............i ran him all motor and did not spray. we went from about a 55 roll and both hit it in 2nd gear, through 3rd he put about a half car on me and almost through 4th where we shut it down at 120 he had about 3/4- 1 car on me. his car is untuned though, not since his cam install, he recently got the heads put on. i thought i held up nicely. i have never pushed my car that hard before as i was taking her well over 6 grand with every shift and actually felt my tires bust loose a bit when i slammed it into 3rd and 4th. what do u guys think??
Texas Speed 224 r cam, Prc Stage 2.5 5.3 Heads Milled to 59cc , LS6 Intake, Pacesetter Longtubes, true duals with moroso spirals dumped, UD Pulley, PP Throttle body, slp lid, TR6 Plugs, LS7 Clutch Kit...............i ran him all motor and did not spray. we went from about a 55 roll and both hit it in 2nd gear, through 3rd he put about a half car on me and almost through 4th where we shut it down at 120 he had about 3/4- 1 car on me. his car is untuned though, not since his cam install, he recently got the heads put on. i thought i held up nicely. i have never pushed my car that hard before as i was taking her well over 6 grand with every shift and actually felt my tires bust loose a bit when i slammed it into 3rd and 4th. what do u guys think??
Thread Starter
Teching In
Joined: Apr 2007
Posts: 15
Likes: 0
From: round lake beach, IL
duh sorry i read you didnt spray but when i looked at your sig afterwards i took into account you had a 100shot in that case i think you did very well just keepin up Trending Topics
Thread Starter
Teching In
Joined: Apr 2007
Posts: 15
Likes: 0
From: round lake beach, IL
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
my buddy and i were out joyriding in our boulevard cruisers going to a friends house when we decided to get a few runs in. my mods are in my sig and his mods are ::99 NBM M6 Formula
Texas Speed 224 r cam, Prc Stage 2.5 5.3 Heads Milled to 59cc , LS6 Intake, Pacesetter Longtubes, true duals with moroso spirals dumped, UD Pulley, PP Throttle body, slp lid, TR6 Plugs, LS7 Clutch Kit...............i ran him all motor and did not spray. we went from about a 55 roll and both hit it in 2nd gear, through 3rd he put about a half car on me and almost through 4th where we shut it down at 120 he had about 3/4- 1 car on me. his car is untuned though, not since his cam install, he recently got the heads put on. i thought i held up nicely. i have never pushed my car that hard before as i was taking her well over 6 grand with every shift and actually felt my tires bust loose a bit when i slammed it into 3rd and 4th. what do u guys think??
Texas Speed 224 r cam, Prc Stage 2.5 5.3 Heads Milled to 59cc , LS6 Intake, Pacesetter Longtubes, true duals with moroso spirals dumped, UD Pulley, PP Throttle body, slp lid, TR6 Plugs, LS7 Clutch Kit...............i ran him all motor and did not spray. we went from about a 55 roll and both hit it in 2nd gear, through 3rd he put about a half car on me and almost through 4th where we shut it down at 120 he had about 3/4- 1 car on me. his car is untuned though, not since his cam install, he recently got the heads put on. i thought i held up nicely. i have never pushed my car that hard before as i was taking her well over 6 grand with every shift and actually felt my tires bust loose a bit when i slammed it into 3rd and 4th. what do u guys think??
Thread Starter
Teching In
Joined: Apr 2007
Posts: 15
Likes: 0
From: round lake beach, IL
LOL The truth shall set you free!
C'mon, what's a highspeed fishtail if you can't live to tell everyone about it? 
Thread Starter
Teching In
Joined: Apr 2007
Posts: 15
Likes: 0
From: round lake beach, IL
