Low Trac Light on and off when on highway
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: Salinas/ San Diego, CA
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Low Trac Light on and off when on highway
Hey guys, So I recently installed a MWC fab 9" rear end. So in town cruising the Trac light is off, it seems the Trac light only comes on when im above 60mph. Ill be cruising on the highway and the light will come on for a few seconds, then turn off, the light is not triggered by any bumps in the road. Just turns on and off sporadically. When I get off the highway the light stays off. Any ideas?
TIA
TIA
#7
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Apr 2005
Location: Salinas/ San Diego, CA
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Wheels are staggered. Fronts are 18x9.5" w/ 275/35/18. Rears are 18x10.5" w/ 295/35/18. I have had this wheel combo since 2005. The low trac light problem just start after installing a Midwest fab 9 rear end. I messaged Midwest chassis and he asked if I programmed my computer to 3:50 gear ratio since stock was 3:42's. I have not reprogrammed the computer yet. Would you think that would mess with the sensors?
Trending Topics
#8
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 79 Likes
on
70 Posts
In my experience, the computer will trip when it sees different speeds from the front vs. the rear wheels. When my car came off the dyno, it was lit up like a Christmas tree on the dash. Drove it a few miles and they all reset themselves. So if one sensor is giving a false reading, or tires sizes aren't the same, the computer will pick this up as an error.