Installed SLP Bilistens and BMR Springs Pics
#1
TECH Apprentice
Thread Starter
iTrader: (31)
Join Date: Jul 2010
Location: Loganville, Ga
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Installed SLP Bilistens and BMR Springs Pics
To start off with the car was lowered on Eibach Sportline Springs with the factory decarbons with 170,000 miles. The reason i raised the car up was because i am putting on some kooks headers and do not want to ding them up.
Before Pics with Eibach Springs
Pic of the front drive side shock the passanger side was just as bad took us almost 4 hours to just do the front.
After Pics Bilistens and BMR Springs
Overall im very pleased with the ride the car has, its very smooth and does not bounce me to death. As for the height im going to have to get used to it as i liked the way it looked slammed.
Click on the Pic its a walk around vid of the camaro after the install
[IMG]
Enjoy tell me what you think
Before Pics with Eibach Springs
Pic of the front drive side shock the passanger side was just as bad took us almost 4 hours to just do the front.
After Pics Bilistens and BMR Springs
Overall im very pleased with the ride the car has, its very smooth and does not bounce me to death. As for the height im going to have to get used to it as i liked the way it looked slammed.
Click on the Pic its a walk around vid of the camaro after the install
[IMG]
Enjoy tell me what you think
#2
Teching In
iTrader: (4)
Join Date: Jul 2009
Location: Pearland TX.
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
The car looks good. I put the same shocks on my car yesterday with stock springs. I also installed an Energy Suspension control am bushing kit at the same time. It tool my brother and I about six hours to do just the front end. The car rides great now.
#4
TECH Apprentice
Thread Starter
iTrader: (31)
Join Date: Jul 2010
Location: Loganville, Ga
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Yea it is a lot more comfortable, the stance is starting to grow on me I'm just going to have to buy a taller tire to fill in the wheel well.
Last edited by atrain59; 05-09-2011 at 10:20 AM.
#5
TECH Fanatic
iTrader: (9)
Join Date: Apr 2008
Location: Tampa,Florida
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
The cars do look killer when they are low it's just hard to maintain good ride quality...
The new stance and improved ride quality will grow on you
Trending Topics
#12
On The Tree
iTrader: (13)
I took it to Firestone and paid a guy $20 to fight with it for 45 min. He had pneumatic tools, I did'nt.
I cleaned out the shock mount of all rust and sprayed the inside with Rustoleum Automotive rubber spray (3 coats) bought new pilot bearings and coated the shock stem with electrical grease. Hopefully that will keep it from rusting.
#13
LS1Tech Premium Sponsor
iTrader: (40)
Stance looks good! I am sure the ride will be much better with the BMR springs.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!