Which k-member manufacturer and need help with options.
#21
On The Tree
Thread Starter
Join Date: Nov 2003
Location: Houston/Waco, Texas
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
So obviously I need the stock rack mounts because I have power steering. Why do people convert over to the manual steering rack? Cant you just run a short belt that bypasses the pump? Thanks.
#22
TECH Addict
iTrader: (4)
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ThaBeaSSt
So obviously I need the stock rack mounts because I have power steering. Why do people convert over to the manual steering rack? Cant you just run a short belt that bypasses the pump? Thanks.
#23
TECH Apprentice
iTrader: (2)
Join Date: Nov 2001
Location: Crossroads, Texas
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
I have seen the manual steering racks that fit in place of the power steering unit, but they are like 500 bucks. Is buying a pinto steering rack cheaper? If so do you have any part numbers or links to where I can get one that will fit? Is there any other modification needed or do you just pull the power steering unit out and put the pinto steering unit in?
#25
TECH Addict
iTrader: (4)
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
My Pro Fab seems to work pretty good as a daily driver. I don't have many miles to determine longevity but seems to drive as good or better than stock. My time slip shows faster!
It's a good mod. I recommend the K member and A arms!
It's a good mod. I recommend the K member and A arms!
#26
On The Tree
Thread Starter
Join Date: Nov 2003
Location: Houston/Waco, Texas
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
What about the motor mounts? Im thinking of going with a BMR unit and plus there is a GP going on right now, but when it says with or without motor mounts, is that the mount or the actual bushing? So if I ordered the k-member with mounts, would it come with the mount for the busing or both. Im just trying to get on the right page before I make my order. Thanks. Also, do you know if the Spohn tubular solid mounts work with the BMR k-member?
#28
10 Second Club
iTrader: (1)
Originally Posted by ThaBeaSSt
What about the motor mounts? Im thinking of going with a BMR unit and plus there is a GP going on right now, but when it says with or without motor mounts, is that the mount or the actual bushing? So if I ordered the k-member with mounts, would it come with the mount for the busing or both. Im just trying to get on the right page before I make my order. Thanks. Also, do you know if the Spohn tubular solid mounts work with the BMR k-member?