Suspension & Brakes Springs | Shocks | Handling | Rotors

Strano Spings Question

Thread Tools
 
Search this Thread
 
Old 07-11-2012 | 09:06 PM
  #21  
sscamaroburn02's Avatar
TECH Addict
iTrader: (14)
 
Joined: Sep 2005
Posts: 2,052
Likes: 7
Default




Old 07-11-2012 | 09:09 PM
  #22  
blk97z28's Avatar
Thread Starter
TECH Fanatic

iTrader: (3)
 
Joined: Jan 2006
Posts: 1,801
Likes: 0
From: Lincoln, Nebraska
Default

Originally Posted by sscamaroburn02



Very nice!! Thanks ALOT man!
Old 07-12-2012 | 08:50 AM
  #23  
dr_whigham's Avatar
The Scammer Hammer
15 Year Member
iTrader: (49)
 
Joined: Apr 2009
Posts: 6,710
Likes: 22
From: Lafayette, LA
Default

Good Lord that's a little lower than I'd like to see. Then again, my turn downs are at more of a 45, and I also have Spohn Solids so my exhaust is TIGHT to the body.

The roads here just suck. Massively.

The only other reason I'm leery of lowering the car is a few of the alignment shops told me if the specs aren't in the computer, they can't align the rear, since it wasn't adjustable from the factory.

I say horse ****, but I know nothing about alignment.
Old 07-12-2012 | 09:06 AM
  #24  
sscamaroburn02's Avatar
TECH Addict
iTrader: (14)
 
Joined: Sep 2005
Posts: 2,052
Likes: 7
Default

funny thing is I haven't even gotten front aligned since lowering earlier this year. I don't drive the car alot so just havent got it done yet. Yeah the roads are pretty decent here and I drive alot of highway also. I see corvettes at shows that are riding on the ground and they make it okay. Just gotta know how to drive and where not to go.
Old 07-12-2012 | 10:59 AM
  #25  
LS14EVR's Avatar
TECH Resident
iTrader: (3)
 
Joined: Jul 2009
Posts: 856
Likes: 0
From: Fenton, MI
Default

sscamaroburn.... your exhaust is way low. Holy cow.
Old 07-12-2012 | 12:30 PM
  #26  
sscamaroburn02's Avatar
TECH Addict
iTrader: (14)
 
Joined: Sep 2005
Posts: 2,052
Likes: 7
Default

I can get around just fine. If I turn the tips outward more and get aftermarket TA then it'll go up another inch. I'm used to low cars so doesn't bother me and I don't DD it.
Old 07-12-2012 | 12:44 PM
  #27  
blk97z28's Avatar
Thread Starter
TECH Fanatic

iTrader: (3)
 
Joined: Jan 2006
Posts: 1,801
Likes: 0
From: Lincoln, Nebraska
Default

Originally Posted by sscamaroburn02
I can get around just fine. If I turn the tips outward more and get aftermarket TA then it'll go up another inch. I'm used to low cars so doesn't bother me and I don't DD it.
Thanks for the pics, I do like that stance. Did you state how much it dropped you? If not would you mind stating the amount of drop you got from the springs?
Old 07-12-2012 | 12:53 PM
  #28  
sscamaroburn02's Avatar
TECH Addict
iTrader: (14)
 
Joined: Sep 2005
Posts: 2,052
Likes: 7
Default

not exactly sure as I did shocks first and used lower perch with hose mod in rear and then I got springs without hose mod and upper perch now. I'd say rought 1.2 inches max. Car is perfectly level side to side with the front being just a tad lower than the rears for a great stance.
Old 07-14-2012 | 07:50 PM
  #29  
LILWS6's Avatar
12 Second Club

 
Joined: Feb 2006
Posts: 993
Likes: 3
From: Waukesha,WI
Default

Love my strano's i don't perticularly like the ride with qa1 shocks but i know i shouldnt have bought them. The front is a coil over and i eye balled the height from the old struts in the front and ended up with a rake i love it the way it is now i would hate to make it any higher. But i do need different shocks.
Stock ride height


strano's
Old 07-15-2012 | 12:00 PM
  #30  
Firebirdmuscle's Avatar
10 Second Club
10 Year Member
iTrader: (16)
 
Joined: Jan 2012
Posts: 1,206
Likes: 13
From: Mississippi
Default

Originally Posted by LILWS6
Love my strano's i don't perticularly like the ride with qa1 shocks but i know i shouldnt have bought them. The front is a coil over and i eye balled the height from the old struts in the front and ended up with a rake i love it the way it is now i would hate to make it any higher. But i do need different shocks.
Stock ride height


strano's

Man your front looks really low. I plan on getting duals after rearend purchase. I want to lower my car but I'm scared I'll drag and scrape alot if I do
Old 07-15-2012 | 01:23 PM
  #31  
LILWS6's Avatar
12 Second Club

 
Joined: Feb 2006
Posts: 993
Likes: 3
From: Waukesha,WI
Default

front is very low but that i could fix if i wanted. The qa1's in the front are adj. i just like the look and since i bumped them up a couple turns (same ride height as pic above) i haven't scraped on anything. I used to have to back into my moms drive way at a certain angle or the y-pipe would drag but hasn't been an issue as of late.
Old 07-15-2012 | 07:08 PM
  #32  
NemeCes's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jun 2012
Posts: 53
Likes: 0
Default

So your fronts are qa1 coilovers and the rears are on strano springs? Im going to be looking into dropping my car soon and I like how your front sits.

Thanks
Old 07-15-2012 | 08:08 PM
  #33  
JD_AMG's Avatar
TECH Senior Member
 
Joined: Jan 2004
Posts: 5,799
Likes: 16
From: St.Charles MO
Default

Originally Posted by NemeCes
So your fronts are qa1 coilovers and the rears are on strano springs? Im going to be looking into dropping my car soon and I like how your front sits.

Thanks
Do a good long search before you decide, if you care about ride quality or handling, a drag shock like QA1s are not the way to go.
Old 07-16-2012 | 03:08 PM
  #34  
JoshuaGrooms83's Avatar
TECH Addict
10 Year Member
iTrader: (2)
 
Joined: Oct 2010
Posts: 2,112
Likes: 163
From: Locust Grove, VA
Default

Got Vogtlands myself. same ride height as stranos but spring rate is a bit softer. got them paired with Koni SA's.
Old 07-16-2012 | 03:33 PM
  #35  
z28bryan's Avatar
TECH Junkie

iTrader: (7)
 
Joined: Jul 2005
Posts: 3,934
Likes: 0
From: MA
Default

Originally Posted by JoshuaGrooms83
Got Vogtlands myself. same ride height as stranos but spring rate is a bit softer. got them paired with Koni SA's.
I just tried to look up the info to confirm, but if I can recall correctly one side is a bit stiffer. It might be the rears that the Vogtland purples are stiffer and the fronts are softer than Stranos (whites)

Actually.. are your springs purple? They all appear purple on the main website. Just curious
Old 07-16-2012 | 04:43 PM
  #36  
JoshuaGrooms83's Avatar
TECH Addict
10 Year Member
iTrader: (2)
 
Joined: Oct 2010
Posts: 2,112
Likes: 163
From: Locust Grove, VA
Default

Originally Posted by z28bryan
I just tried to look up the info to confirm, but if I can recall correctly one side is a bit stiffer. It might be the rears that the Vogtland purples are stiffer and the fronts are softer than Stranos (whites)

Actually.. are your springs purple? They all appear purple on the main website. Just curious
yep mine are purple. actually looks really good with the yellow konis lol
from what i remember correctly and its been a minute so correct me if im wrong, Stanos i thought were 550 where vogtlands are 450. eitherway both are excellent springs and complement f-bodys quite well. depends on how you want your car to handle. also depends on whats going on with the rst of your setup like how big are you swaybars, how stiff are your shocks, stock vs aftmarket suspention parts, poly/rod/roto/rubber mounts, its all dependant on eachother. for me i can live with the slight softer springs. i also have BMR 35/25 swaybars keeping me planted as well. My Konis are set at 3 clicks from full soft front and full soft on rears. car handles smoother then stock setup ever did.
Old 07-16-2012 | 05:59 PM
  #37  
2win_SS's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jan 2012
Posts: 519
Likes: 0
Default

Originally Posted by LILWS6
Love my strano's i don't perticularly like the ride with qa1 shocks but i know i shouldnt have bought them. The front is a coil over and i eye balled the height from the old struts in the front and ended up with a rake i love it the way it is now i would hate to make it any higher. But i do need different shocks.
Stock ride height


strano's
^^^ i think your car looks PERFECT! front looks as low as the BMR springs. Nice ride height
Old 07-17-2012 | 12:59 AM
  #38  
Azar_Hawke's Avatar
On The Tree
iTrader: (5)
 
Joined: Dec 2011
Posts: 171
Likes: 0
From: Cary, NC
Default

Here is mine with Stranos and Konis.

Old 07-17-2012 | 01:33 AM
  #39  
trans_am7935's Avatar
TECH Fanatic
15 Year Member
iTrader: (15)
 
Joined: Mar 2009
Posts: 1,453
Likes: 3
From: Glen Burnie, MD
Default

Originally Posted by Azar_Hawke
Here is mine with Stranos and Konis.

your rear is kinda low, is it just the pic or did you do the heater hose mod as well?
Old 07-17-2012 | 02:52 AM
  #40  
Azar_Hawke's Avatar
On The Tree
iTrader: (5)
 
Joined: Dec 2011
Posts: 171
Likes: 0
From: Cary, NC
Default

It's the angle. I also have slightly larger rear wheels.


Quick Reply: Strano Spings Question



All times are GMT -5. The time now is 02:04 AM.