my406cid

Good afternoon. Bought 05 ctsv calipers and 2010 camaro ss rotors and have the blazer 2wd zq8 spindles. I have the adapter bracket to make the 13" zr1 rotors which I am currently running. Where can u get a bracket to adapt the cts v calipers to these spindles? The current bracket makes the caliper sit about an 2" too high. Thanks in advance

my406cid

Bump.anyone?

my406cid

Bump to top

my406cid

Seriously?

RedLineWS6

I can't find anything on the net that has any answers & I am not really experienced with the G-body. I would just say find somebody to fab you up some brackets and call it a day. Might even be worth making more then what you need and sell them off. Now there is an idea!

my406cid

You are correct. I can't find any info either. Still looking

wmskateteam

iTrader: (8)

researched this quite a bit, no one makes a bracket to my knowledge or at least it isn't posted anywhere i have found. I have a g body and a set of 4 pot V calipers too. if you do find something please share!

my406cid

Called kore3. Thy said that with the ctsv caliper on a s10 zq8 spindle, you have to go too deep into the structure of the spindle. I ended up using my 14 " rotors with c5 zr1 caliper with kore3 adapter brackets. Goin to sell my ctsv calipers.

wmskateteam

iTrader: (8)

Thanks for sharing, zr1 caliper do you mean z51? I jave a set of the 4 pot v calipers and might try to stuff them under some ws6 wheels on a f body.