redcamaro4140

iTrader: (2)

I recently brought two relocations brackets from founders performance the weld in style I'm look to see how people put these in pics please

guppymech

iTrader: (7)

Strange uses stock GM bracketry on its F-body rear ends with BMR relocation brackets if requested. With that in mind here are a couple pics of my S60 with the BMR relo brkts, should be similar to your Strange 12 bolt. Kinda hard to see details with the black paint.

redcamaro4140

iTrader: (2)

So you think I'll be okay with my brackets

guppymech

iTrader: (7)

^^^Yes you'll be okay install them just like on the stock 10 bolt as the lca brackets Strange uses are identical to what GM used on the 10 bolt. Did they come with instructions and mount hardware?

redcamaro4140

iTrader: (2)

This what it come with

guppymech

iTrader: (7)

BMR supplies good instructions with their lca relo brkts, here's a link.
http://www.bmrsuspension.com/siteart/install/CAB001.pdf
You should've gotten instructions with the Founders kit, if not use the BMR instructions.

redcamaro4140

iTrader: (2)

I'll check there website

01ssreda4

iTrader: (96)

https://ls1tech.com/forums/gears-axl...t-install.html

redcamaro4140

iTrader: (2)

Nice buddy I already got my 12 bolt installed just doing the lca relocations brackets

JakeFusion

iTrader: (7)

One reason I like the Strange over the Moser - the axle tubes are the same as GM, so a lot of 10-bolt parts work no problem. Not to mention the torque arm bracketry is superior on the Strange...

mjs1012

iTrader: (36)

This is why I went with strange. The install was easy and everything I used with my 10 bolt swapped right over to my s60. Only modification I needed to do was cut some of my umi torque arm.

01ssreda4

iTrader: (96)

I thought I had some installed pics in there that might be able to help you out...