Anyone run 315s and bump stops on a fourth gen?

Reply Subscribe

Thread Tools

Search this Thread

05-30-2017 | 07:03 PM

#21

HCI2000SS

TECH Senior Member

iTrader: (2)

Joined: Aug 2012

Posts: 11,139

Likes: 16

From: Howell & Fenton MI

17x11 ZR1's with adjustable PHB and BMR lowering springs. Running the stock bump stops with no problems. I did roll the fenders just in case though

Reply Like

06-01-2017 | 10:13 AM

#22

stp001

On The Tree

Joined: Jan 2016

Posts: 181

Likes: 0

From: Indianapolis, Indiana

Quote:

Originally Posted by hooley

I am purchasing a moser 12 bolt rear end. It will be 3 inches shorter perside. I ordered weld rts 71 17x10.5 in a 5.5 backspace. I am planning to run 315/35/17 mickey thompson drag radials. Will I have any issues? I dont want to roll the fenders.

You won't be having issues on the outside, it will be the inside that will be the concern. You will probably have to use a 1" spacer, or better yet, have them make the rear end only 2" shorter.

Reply Like

09-19-2017 | 06:49 AM

#23

blackbirdls1

TECH Enthusiast

iTrader: (5)

Joined: Jan 2006

Posts: 678

Likes: 4

From: Oviedo, FL

Quote:

Originally Posted by HCI2000SS

17x11 ZR1's with adjustable PHB and BMR lowering springs. Running the stock bump stops with no problems. I did roll the fenders just in case though

What technique did you use to roll fenders? Did you do BFH as well?

Reply Like

09-19-2017 | 11:29 AM

#24

joecar

TECH Senior Member

Joined: Apr 2002

Posts: 6,077

Likes: 12

From: So.Cal.

What is the proper offset...?

Reply Like

09-19-2017 | 11:39 AM

#25

BrntWS6

TECH Addict

iTrader: (7)

Joined: Feb 2005

Posts: 2,004

Likes: 10

From: Land of the FOID

315's nittos with adj phb. No rolling fenders and no BFH. I had a slight rub where the tire skinned some of the black coating away on the drivers side but no damage to the tire at all.

Reply Like