Question for BMR customers
TECH Fanatic
Joined: Nov 2004
Posts: 1,118
Likes: 0
From: TX
They make a wide variety of torque arms, lca's and panhard bars.
The old design panhard bar was problematic w/ the adjuster in the middle. The new ones are located at the end where it should be.
Their LCA's are pretty much like the other one's you see out there
I have BMR crome moly LCA's, Panhard Bar, Adjustable torque arm and non-crome moly Torque arm relocation crossmember, subframe connectors and shock tower brace. I'm very satisfied with most of it. There are a few things that I am mildly unhappy with, but they dont have to do with BMR, they have more to do with F-bodies in general
The old design panhard bar was problematic w/ the adjuster in the middle. The new ones are located at the end where it should be.
Their LCA's are pretty much like the other one's you see out there
I have BMR crome moly LCA's, Panhard Bar, Adjustable torque arm and non-crome moly Torque arm relocation crossmember, subframe connectors and shock tower brace. I'm very satisfied with most of it. There are a few things that I am mildly unhappy with, but they dont have to do with BMR, they have more to do with F-bodies in general
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I have had good and bad with BMR. On my 3rd gen I ran exclusivly Spohn products, which I was and very pleased with. On my LT1 I had BMR products. Pretty good quality, but when I'm only pushing 330rwhp and snap a panhard rod in half then they dont want to help in any way. Well, not happy is to put it mildly. Anywho, I have friends that have had excellent experience with them. I still am partially to go with Spohn again or try out LGMotorsports, pricey but so far good rep.
Ski
Ski
Originally Posted by Rebelord
I have had good and bad with BMR. On my 3rd gen I ran exclusivly Spohn products, which I was and very pleased with. On my LT1 I had BMR products. Pretty good quality, but when I'm only pushing 330rwhp and snap a panhard rod in half then they dont want to help in any way. Well, not happy is to put it mildly. Anywho, I have friends that have had excellent experience with them. I still am partially to go with Spohn again or try out LGMotorsports, pricey but so far good rep.
Ski
Ski
BMR is sending the other front spring by next Wednesday. TBYRNE followed up on this real well. Many thanks..
Installed BMR rear springs and added 55mm Koni bumpstops this weekend. I will receive my orphaned front spring today (slipped out of the box at UPS). The fronts will go in Friday. The customer service was very good at both TBYRNE and BMR. After I install the fronts I will update you guys, right now I'm riding on a 2 legged horse, but it works.
Installed BMR rear springs and added 55mm Koni bumpstops this weekend. I will receive my orphaned front spring today (slipped out of the box at UPS). The fronts will go in Friday. The customer service was very good at both TBYRNE and BMR. After I install the fronts I will update you guys, right now I'm riding on a 2 legged horse, but it works.
Last edited by JohnnyStorm; Jun 29, 2005 at 07:07 AM.
Good stuff - not the best - but it won't kill you.
The older adjustable panhard rods had crappy ends on them - cheap rod ends. But, they've upgraded to QA1 Endura series (as have I), and they're fine now.
The older adjustable panhard rods had crappy ends on them - cheap rod ends. But, they've upgraded to QA1 Endura series (as have I), and they're fine now.
TECH Senior Member
iTrader: (10)
Joined: Nov 2001
Posts: 8,766
Likes: 0
From: Gainesville, Denton TX
BMR SFCs and PHB. Just recently got the PHB, from a guy that had it NIB for a while..
Its the center adjustment, whats the problem with those??
No complains of any of their products.
Talked to the BMR guys on the PowerTour, very knowledgable and helpful. Guy wasnt trying to sell me all kinds of ****, we talked about various manufactors, etc, didnt talk trash about one of them. I'll be getting a TQ arm from them, aswell as a tranny crossmember.
Its the center adjustment, whats the problem with those??
No complains of any of their products.
Talked to the BMR guys on the PowerTour, very knowledgable and helpful. Guy wasnt trying to sell me all kinds of ****, we talked about various manufactors, etc, didnt talk trash about one of them. I'll be getting a TQ arm from them, aswell as a tranny crossmember.
My god... Someone once posted they wanted to lower their car. I posted my good experience with BMR springs and suggested he consider the same purchase. I nearly got raped by others on how cheap they are, that DMS is good and that Eibach is average (not too good, either) and that BMR sucks, and best of all... That BMR = Kmart. I'm reading all these posts and I'm pleased to hear such positive things. This thread is like an alternate dimension. 
