98TADRIVER

iTrader: (36)

Hey, does the *** end raise up in the air a lil when you are accelerating? mine used to. people were like WTF?? I had a similar setup, (minus the coilovers) during spring of last year. Before that, I blew up my 10bolt at the track, http://videos.streetfire.net/video/8...bbf7c8924a.htm and didnt have 2400 at the time to drop on a new rear, and my friend mentioned something to me about a 3rd gen roller he was selling with a 9inch rear with 4.11s. i bought the roller for 400.00 and used this crazy short ladder bar set up that came with it, since there was no torque arm provision. http://s28.photobucket.com/albums/c2...ent=setup2.jpg http://s28.photobucket.com/albums/c2...uspension1.jpg well, it worked great for a while, until the control arms actually snapped when i was snatching 2nd gear on the street http://s28.photobucket.com/albums/c2...brokenlcas.jpg nothing else to keep the pinion angle from going crazy which ultimately led to this http://s28.photobucket.com/albums/c2...t=snapped1.jpg DS LOOP ***! Got the LCA's fixed http://s28.photobucket.com/albums/c2...t=S3010480.jpg then some time later, i was going down the road and the car felt weird when i would get on the gas, like it was twisting/hopping some, thought it was a blown rear passenger side shock, which it was, but something caused that shock to blow- http://s28.photobucket.com/albums/c2...hrearBROKE.jpg http://s28.photobucket.com/albums/c2...rearbroke2.jpg the damn weld broke on the axle tube, causing it to move around freely. In conclusion, it was a sick setup for drag racing, i was cutting 1.8 60's on 245 50 16 sumitomo rubber, and raping people on the street when i had my drag radials http://videos.streetfire.net/video/3...983571742f.htm but not for me lol. I'd take the torque arm setup over that.

z2fast8

if the rear of ur car raises when u accel then u have a poorly designed rear suspention.