C6 Z06 brakes installed(pics)
#43
On The Tree
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Tennessee
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That's correct. Only 18's or larger. And even then there are very few aftermarket wheels that will clear them. C6 wheels are the best bet for them. I got lucky and made mine work with a small spacer.
#46
On The Tree
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Tennessee
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by W105
Looks amazing, bet it made a world of difference.
Will these work with C5 Z06 wheels? 18"x9.5" +57mm offset?
Will these work with C5 Z06 wheels? 18"x9.5" +57mm offset?
Originally Posted by v7guy
how much were the brake pads for those things?
#52
On The Tree
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Tennessee
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You'll have to take some measurements to find out. Here's what you'll need to check clearance. http://www.kore3.com/downloads/fitme...es/DOC0019.pdf
#53
TECH Enthusiast
Join Date: Dec 2004
Location: Zanesfield, OH
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Do you have any pictures of the rear calipers and rotors. What stops me from doing a lot of the other big brake kits is that they dont make rears. I want front and rear to match. What does it take to put the rears on a 02 TA rear end? I also have CCW 505A's but they are 18's do you think these brakes would fit well with the 18's? What size spacers did you use and where do you buy spacers?
You car looks friggin amazing by the way!!!
You car looks friggin amazing by the way!!!
![The Pimp](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_pimp.gif)
#57
On The Tree
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Tennessee
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by greenherb
beautiful job and car..... what rotors are you using.... gm ? 1912787 ?.... is gm still running one side backwards.... is there an after-market solution?...
#58
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by fastbird96
Yes, I'm running the GM rotors which have the backwards right side rotors. There are aftermarkets available but they're expensive.