jimmyducati

iTrader: (3)

how is the caliper working with the stock master cylinder? any issues with pedal stroke or not enough pedal to fill up all those pistons? looks great, this will be my brake upgrade after the 18's!

SIC LSX

iTrader: (10)

i will do this to my car

Black00Z

Looks great--thanks for sharing

aegisjones54

How would you get those rotors and calipers installed on a 3rd gen? Is it even possible? Modified spindle?

Thanks,
Michael

Cherub

I am envious!

SpdFrk1990

iTrader: (6)

Yeh its possible there is a kit and it does take some modification.

02TransAm/Batmobile

iTrader: (32)

Holy Crap!! Hands Down - THE BEST LOOKING LT1 IN THE WORLD!!!

SpdFrk1990

iTrader: (6)

Sry there is a c5 kit for the thirdgen but if a c5 kit will work a c6 will also cause I think the calipers bolt up to the same bracket if im not mistaken.

00CaliforniaZ28

iTrader: (11)

Was there a large difference in wheel clearance when going to the Z06 setup? I have maybe 3/4" of clearance over the stock caliper with my wheels... any hopes of squeezing those calipers in there in your opinion?

fastbird96

iTrader: (1)

Yes there is a huge difference in clearance. The only way to know is to take some measurements though.

ReFtheMC

iTrader: (6)

What! i didn't even know this was possible....

Good job though it came out great

some_punk

will the rear brake setup, is there anyway of making the e-brake work too?

chavez885

iTrader: (12)

Don't waste your time trying to upgrade/change your rear brakes.

1sick'98WS6

iTrader: (19)

Im suprised you had a spare twenty dollars to taket that picture after all that.... ha. It looks great though bigger than a large pizza.

Dex

iTrader: (5)

another back from the dead wtf

v7guy

iTrader: (1)

I'm happy to see threads back to the top, it means people are actually doing a search instead of asking another question on the same topic. It increases the info in one post and increases the odds that a future person searching will find the answers they are looking for. It's a welcome development and an overall improvement for the board and the people that use it.

some_punk

The package that I found on ebay for around $1600, comes with all 4 calipers rotors and pads, so I thought I might as well use them.

https://ls1tech.com/forums/conversions-swaps/756675-yes-c6-z06-brakes-will-fit-4th-gen-f-body.html

And the wheels used by the OP of that thread, where did he get them? I like them much better than C6 Z06s

Big Bird WS6

iTrader: (9)

not to thread hyjack but,

kore3 says it will fit c5/c6 calipers to an f-body. you think the new zr1 will fit?

also could i run the new zr1 rotors on my car. (and please nothing about the rims. i am getting new ones so all i care about is a brake answer. thanks)