WTB/WTT/WTS *added* items
04-15-2010, 11:14 AM
#1
11 Second Club
Thread Starter
iTrader: (18)
Join Date: Jan 2002
Location: Garland, Tx
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
WTB/WTT/WTS *added* items i have mac mids with orp into slp DD with a cutout before the axle i want to get rid of. preferably pacesetter LT's with a decent 3" setup, either duals or full exhaust. i can trade current setup, add cash to trade, or sell outright. depends on what option is presented. sorry i don't have any pics as items are still on the car. but they all have roughly ~60k miles by me, not sure total as all parts were used when purchased.
here's items listed if sold separate:
macs- 150
mac orp- 50 or 175 as a combo
slp DD- 150
i need an ls6 intake to finally toss out the ls1 stocker. so if someone could possibly let one go for 250ish picked up or around that price shipped, i'd be greatly appreciative!
also have a full set of Forgeline comp RS wheels (17x9.5/17x11) that i'll let go for crazy cheap for a few reasons. one wheel is bent and needs to be fixed. it will slowly leak air as was untold to me by the previous owner.
but if you're careful and pay attention to not park on top of the bent part the leak is non-existant. but i got tired of having to do that everytime so i took them off. one of the rears also has a small bend, no air leaks from tire whatsoever. they were polished, well three still are, i stripped one down and painted the center black. it wasn't the best job but i wanted to see how it would look, this was before i found cheap CCW's. so i can paint all four and add a little cost to the set or give a hella good deal for how they sit now. they don't include the tires pictured.
all 4 wheels painted- 500 picked up
wheels as they sit- 300 picked up
aftermarket taillights for 93-97 camaros but will fit 98-02 with an LT1 wiring harness. to me they are somewhat vette inspired. $100 shipped
pair of stock rear sidemarker lights- $15 shipped
i will trade for the following things: ls6 intake or comparable intake, a good condition LS shortblock, good set of upgraded heads, nitrous kit, other misc performance parts.
here's items listed if sold separate:
macs- 150
mac orp- 50 or 175 as a combo
slp DD- 150
i need an ls6 intake to finally toss out the ls1 stocker. so if someone could possibly let one go for 250ish picked up or around that price shipped, i'd be greatly appreciative!
also have a full set of Forgeline comp RS wheels (17x9.5/17x11) that i'll let go for crazy cheap for a few reasons. one wheel is bent and needs to be fixed. it will slowly leak air as was untold to me by the previous owner.
but if you're careful and pay attention to not park on top of the bent part the leak is non-existant. but i got tired of having to do that everytime so i took them off. one of the rears also has a small bend, no air leaks from tire whatsoever. they were polished, well three still are, i stripped one down and painted the center black. it wasn't the best job but i wanted to see how it would look, this was before i found cheap CCW's. so i can paint all four and add a little cost to the set or give a hella good deal for how they sit now. they don't include the tires pictured.all 4 wheels painted- 500 picked up
wheels as they sit- 300 picked up
aftermarket taillights for 93-97 camaros but will fit 98-02 with an LT1 wiring harness. to me they are somewhat vette inspired. $100 shipped
pair of stock rear sidemarker lights- $15 shipped
i will trade for the following things: ls6 intake or comparable intake, a good condition LS shortblock, good set of upgraded heads, nitrous kit, other misc performance parts.
Last edited by KL20; 04-15-2010 at 02:50 PM.
04-15-2010, 12:04 PM
#3
11 Second Club
Thread Starter
iTrader: (18)
Join Date: Jan 2002
Location: Garland, Tx
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
i have three centercaps with allen head screws. i had all four but lost one driving apparently one day. but i know where to get an extra if needed.
Trending Topics
04-21-2010, 08:03 AM
#12
Here's what I need to know. From the back of the head to the front of the transom I have 9", from that point up to the top of the transom is 7"...I need to know if they'll clear the hull of the boat, or if they'll hit.
Basically, I need to know the X dimension...and the 9" part is not to scale, I don't know how far back 9" actually is on those headers.
Basically, I need to know the X dimension...and the 9" part is not to scale, I don't know how far back 9" actually is on those headers.
04-29-2010, 04:59 AM
#16
11 Second Club
Thread Starter
iTrader: (18)
Join Date: Jan 2002
Location: Garland, Tx
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
The macs and ypipe can be fit to the ipipe.
Already PM'd about the exhaust swap, see if we can get it done.
Wheels now 200 picked up, or you can keep the 315 nittos on the rears for 250. I need these wheels gone.
Already PM'd about the exhaust swap, see if we can get it done.
Wheels now 200 picked up, or you can keep the 315 nittos on the rears for 250. I need these wheels gone.
05-01-2010, 03:18 AM
#19
when do you think you would be interested in selling the mac mids with y pipe? does it have the EGR and AIR connections?
im wanting to buy the headers and y pope for my girlfriends stock 2000 trans am by may 20th if they have the EGR and AIR connections and the y pipe i sin relatively good shape
im wanting to buy the headers and y pope for my girlfriends stock 2000 trans am by may 20th if they have the EGR and AIR connections and the y pipe i sin relatively good shape
Last edited by chrysler kid; 05-01-2010 at 03:28 AM.
05-01-2010, 08:40 PM
#20
11 Second Club
Thread Starter
iTrader: (18)
Join Date: Jan 2002
Location: Garland, Tx
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Yea it has the egr/air but they're blcked off but can be unblocked. All I need is to get the LT's/exhaust to swap over and they can be yours.