AFR 225 Heads
07-28-2011 | 09:56 AM
#1
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
AFR 225 Heads *****Sold*****
I got these heads on a trade and I really do not need them. These are for a big bore motor but according to the link below they will work well with boosted LS1 motors.
http://www.race-mart.com/AFR-AFR-1630.html
The heads were taken to 510 Racing here in Houston and they flowed/CCed the heads. This is the results:
230CC intake runner
68cc Chamber
2.080 Intake Valve
.100 65
.200 135
.300 205
.400 267
.500 308
.550 320
.600 325
CFM @ 28" H2O
Tested on a 4.125 Bore
$1,800.00 obo Shipped
$1,700.00 picked up
281-701-1909
I got these heads on a trade and I really do not need them. These are for a big bore motor but according to the link below they will work well with boosted LS1 motors.
http://www.race-mart.com/AFR-AFR-1630.html
The heads were taken to 510 Racing here in Houston and they flowed/CCed the heads. This is the results:
230CC intake runner
68cc Chamber
2.080 Intake Valve
.100 65
.200 135
.300 205
.400 267
.500 308
.550 320
.600 325
CFM @ 28" H2O
Tested on a 4.125 Bore
$1,800.00 obo Shipped
$1,700.00 picked up
281-701-1909
Last edited by Bad Chad; 08-06-2011 at 09:53 AM.
07-28-2011 | 09:38 PM
#3
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
07-28-2011 | 09:40 PM
#4
lol i saw that coming!! im gonna have to hold off but once i get my current car situation settled if they are still laying around i just might have to take you up on that offer!
till then best of luck
till then best of luck
07-28-2011 | 09:42 PM
#5
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
Its all good, Best of luck on your situation and if you need any help just let me know.
Trending Topics
08-03-2011 | 05:48 PM
#10
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
I talked to 510 racing and they said they can go to 61cc safely. Anything more than that would be pushing it.
I don't have anything they will go on.
I don't have anything they will go on.
Last edited by Bad Chad; 08-03-2011 at 06:02 PM.
08-03-2011 | 09:21 PM
#12
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
Depends on your set up. Best thing to do is go to the Tech section and post what you have and your goals. Members will let you know if these heads will work...
They work Very well with 400" on up motors or boosted applications.
They work Very well with 400" on up motors or boosted applications.
08-04-2011 | 10:39 PM
#17
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
08-04-2011 | 11:10 PM
#20
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas