Getting the TA ready for Paint lol
#21
#23
Thanks......To the ******* that put bondo on my bumper... I spent 2 hours sanding half my ******* bumper..grrr
I used the DA for this...Made it go by pretty quick but still takes some time to do.
Anyone have any trick of the trade to get that **** off easy let me know .lol
Sorry no pictures... I didn't feel like taking a picture of a halfway done rear bumper.
I used the DA for this...Made it go by pretty quick but still takes some time to do.
Anyone have any trick of the trade to get that **** off easy let me know .lol
Sorry no pictures... I didn't feel like taking a picture of a halfway done rear bumper.
#24
cant use bondo on a plastic bumper it wil fall right off its either a putty glaze or plastic repair glaze, sand the bumper with 320 dry nothing less it will make too big scrathes then primer the "putty' spot and wet sand the entire bumper including primer with 600 wet sand paper ready for paint. also to prepare your entire car for paint especialy if your goign black again all youd really have to do is wet snd the entire car with 600 and 400 for those bad scrathes.. just take off clear and first layer of black.
#25
I saw the bubbles in the paint in the back....Which is one of the reasons I wanted to repaint my car it looked so bad.
I have the same problem with my front bumper it was red and painted black. I just think the reason its flaking off is...it was a cheap maco paint job... I didn't get it painted there the first owner did.
As for my passenger door it was white before.....You can see if coming out on the edges.
What you talked about doing sanding down and painting over it is what they did.
I want to do this right.. I'm going to sand the car down and get it to metal and fiberglass. And start new.
Thank you for the help..
I have the same problem with my front bumper it was red and painted black. I just think the reason its flaking off is...it was a cheap maco paint job... I didn't get it painted there the first owner did.
As for my passenger door it was white before.....You can see if coming out on the edges.
What you talked about doing sanding down and painting over it is what they did.
I want to do this right.. I'm going to sand the car down and get it to metal and fiberglass. And start new.
Thank you for the help..
#27
#31
Race car pffff No… that’s Joel’s "jgarza54" gutted out car …..mine has full interior
I still have my TA wing I can put on anytime. I'm sanding that down to paint also.
#32
#34
Updated pictures..
Going to do some repair to the rip on the bottom right of the LP area.
So far I have spent about 6 hours sanding this bumper
nding little things out about the car I didn't know.
Damn bondo top right of the bumper
Sanded down the red bumper ...
Only took 2 days of my time going to the shop to do this.
Got half way done and time to leave for the night.
Getting all the bumps off.
I will need to detail the car after Im done lol inside has a lot of dust.
Getting all the bumps out of the side.. I think someone back up into a poll and had a shitty repair job done.
Time to start wet sanding this one.
More bondo on the car ... The people that did the this most have really liked it.. Taking it all off to see how bad it was.
Completed the sanding on this..
Side skirting sanded down.
Both fenders sanded down.
Sanded down back quarter panel
Finished the Spolier. Damn that took along time.
Getting it ready for paint.
Off with the doors. sorry bad picture
Better shot of the doors. Also getting to door jams painted.
I have the car tapped and ready for primer.
Thanks to Josh "skeeter99" for helping me take the car apart.
And Joel"jgarza54" for helping me tape up the car.
And Luckymex_dallas.... I found out yesterday your cousins the one painting my car lol
Going to do some repair to the rip on the bottom right of the LP area.
So far I have spent about 6 hours sanding this bumper
nding little things out about the car I didn't know.
Damn bondo top right of the bumper
Sanded down the red bumper ...
Only took 2 days of my time going to the shop to do this.
Got half way done and time to leave for the night.
Getting all the bumps off.
I will need to detail the car after Im done lol inside has a lot of dust.
Getting all the bumps out of the side.. I think someone back up into a poll and had a shitty repair job done.
Time to start wet sanding this one.
More bondo on the car ... The people that did the this most have really liked it.. Taking it all off to see how bad it was.
Completed the sanding on this..
Side skirting sanded down.
Both fenders sanded down.
Sanded down back quarter panel
Finished the Spolier. Damn that took along time.
Getting it ready for paint.
Off with the doors. sorry bad picture
Better shot of the doors. Also getting to door jams painted.
I have the car tapped and ready for primer.
Thanks to Josh "skeeter99" for helping me take the car apart.
And Joel"jgarza54" for helping me tape up the car.
And Luckymex_dallas.... I found out yesterday your cousins the one painting my car lol
#35
Updated pictures..
Going to do some repair to the rip on the bottom right of the LP area.
So far I have spent about 6 hours sanding this bumper
nding little things out about the car I didn't know.
Damn bondo top right of the bumper
Sanded down the red bumper ...
Only took 2 days of my time going to the shop to do this.
Got half way done and time to leave for the night.
Getting all the bumps off.
I will need to detail the car after Im done lol inside has a lot of dust.
Getting all the bumps out of the side.. I think someone back up into a poll and had a shitty repair job done.
Time to start wet sanding this one.
More bondo on the car ... The people that did the this most have really liked it.. Taking it all off to see how bad it was.
Completed the sanding on this..
Side skirting sanded down.
Both fenders sanded down.
Sanded down back quarter panel
Finished the Spolier. Damn that took along time.
Getting it ready for paint.
Off with the doors. sorry bad picture
Better shot of the doors. Also getting to door jams painted.
I have the car tapped and ready for primer.
Thanks to Josh "skeeter99" for helping me take the car apart.
And Joel"jgarza54" for helping me tape up the car.
And Luckymex_dallas.... I found out yesterday your cousins the one painting my car lol
Going to do some repair to the rip on the bottom right of the LP area.
So far I have spent about 6 hours sanding this bumper
nding little things out about the car I didn't know.
Damn bondo top right of the bumper
Sanded down the red bumper ...
Only took 2 days of my time going to the shop to do this.
Got half way done and time to leave for the night.
Getting all the bumps off.
I will need to detail the car after Im done lol inside has a lot of dust.
Getting all the bumps out of the side.. I think someone back up into a poll and had a shitty repair job done.
Time to start wet sanding this one.
More bondo on the car ... The people that did the this most have really liked it.. Taking it all off to see how bad it was.
Completed the sanding on this..
Side skirting sanded down.
Both fenders sanded down.
Sanded down back quarter panel
Finished the Spolier. Damn that took along time.
Getting it ready for paint.
Off with the doors. sorry bad picture
Better shot of the doors. Also getting to door jams painted.
I have the car tapped and ready for primer.
Thanks to Josh "skeeter99" for helping me take the car apart.
And Joel"jgarza54" for helping me tape up the car.
And Luckymex_dallas.... I found out yesterday your cousins the one painting my car lol
Holy **** its a small word i guess that means we better watch out for luckys car to if he is anything like marty lmao them damn old school street racers. Its going to be fun as hell working there full time now im sure ill learn a few tricks especially dealing with "turbos" So hmmmm who knows what the next mod may be!
Last edited by skeeter99; 04-10-2011 at 02:07 PM.
#37
#38
Hey SSHawk, any way i could talk to your buddy with the paint shop? I live in mesquite, and I got my '81camaro torn down and ready for paint. I was thinking about doing the prep (and the painting) myself, but ive never tackled anything like this. Thanks man.
#40
Holy **** its a small word i guess that means we better watch out for luckys car to if he is anything like marty lmao them damn old school street racers. Its going to be fun as hell working there full time now im sure ill learn a few tricks especially dealing with "turbos" So hmmmm who knows what the next mod may be!
lol Yup
Thanks I can't wait for it to be done.