Junk yard motor and a little bit of nitrous. I will post up pictures below why he calls it that.

Jason Vs Protree Racing

Protree came out on top and did a good job of showing him how it’s done lol
Protree helped Jason out with his setup before the races which helped him out a lot. He wanted tho thank them for all their help.

I’m posting this up for Jason Gamez .. He’s the one that bought “Skeeter99” SS Camaro the Tin Can lol

Stock bottom end LS1 with a Cam… cam specs unknown. Turbo 350.. 4500 stall and stock rear-end. Plus a 200 shot of Nitrous

Car weight with Driver 2900lbs

After the race he took the motor apart to make some changes and found out it wasn’t what he thought it was. Look close at the pictures it has different pistons and different rods.

He was told it had a " RapTR" - 236/242 - .615/.615 - 111 lsa by Thunder racing…. which doesn’t look like the case because they mark the cam this has no markings.

When Josh “Skeeter99” bought the motor he was told it was a new block and had ARP bolts and it had 5k miles on it…

http://www.youtube.com/watch?v=1VnkxWu-HS4

 

Thanks guys, glad we could help yall out sorry about the damage, if yall need some slugs we got some spares! Wish we were down near yall weight!

 

So its the white one?? If so damn that thing launched hard....

 

the white one is the one with junkyard motor

 

Yes the white one's Jason's

ProTree has the green one in the right lane.

Yup.

 

Both roll out hard but the white one lifts the wheels pretty high...

 

What rear end is in the white one?

 

10 bolt rear end if im not mistaking~!

 

Stock 10 bolt with 373's lol

 

Were going to try to make it out there tomorrow to grab some, hell start cutting lol its not hard.

 

I wish Jason would have not slept at the light would have been a tad closer race. Every since i had this car it felt strong but not as strong as it should have been for the weight. Now with it apart it explains it all the car is tuned for a raptr cam and it had a 595/595 cam in it which i still dont know the duration. So were going to change cams freshing it up and play with it some more maybe it will run like it should.

I wanna think Daniel at Pro Tree once again for his advice on the suspension set up the car was leaving like a dog before we talked to him. Ill post some vids of the before.

 

This was at K Dale the night before 1st pass of the night, leaving on the trans brake we were against a pro charged stang it ran a good number even though it was lazy off the line

http://youtu.be/h8ff-Q_2lyY

 

Damn **** left hard on that 10bolt. Surprised it took it with a 4500 stall.
Car didn't leave on the bottle did it??

 

Seeing that car leave like that gives me some hope For my build to go wheels up. Even if it is just a little lol

 

He left off idle and hit the button so pretty much leaving on the bottle he tried leaving on bottle and trans brake but it spun that was before we had it hooking tho

 

Nice run on a 10 looks like the motor been rebuilt before is that rod the only one that's diff

 

So what were the time? 60', 1/4 and what was the DA

 

The Procharged Mustang in the video above is a friend of mine. I'll have to give him ****!

 

Most of these guy won't tell you their times just fyi it ran very well for what it had.

If ProTree wants to post his time that cool... I know Jason doesn't want his time posted.

lol You will have to tell us what he says..

 

so whats it run? or is this one of those cars that keeps everything undercovers.