Well some of you know and some don't know about the car so for those that don't here is the build thread, waited till now to do it cuz it takes me awhile to get them finished cuz their expensive and I'm poor lol.

Here we go
CAR

1992 coupe black on black
Aje k member
Flaming river rack and steering shaft
Coilovers on all four corners
Five lug conversion
Disc brakes in rear with drilled and slotted rotors on all four
3.73 gear
18 inch grey bullits with polished lip, 305s on rear
Four inch cowl hood
Engine bay has the inner fender panels installed that cover the factory holes
10 or 15 gallon fuel cell mounted in trunk with working and hooked up sending unit( bein able to know how much fuel you have ftw)
Battery located in trunk
This car still has full interior including rear seats
The gauge setup is from Florida5.0, they are sick, and everything works- oil psi, water, volts, fuel level, rpm and speedo, also has turn signal indicators, high beam indicator and working check engine light.
I also got the reverse lights to work when you put the car in reverse

MOTOR AND DRIVETRAIN

ls1
11.5 cr
Stock bottom end
Katech rod bolts
Patriot heads
Custom cam from Tony Mamo
Had to flycut pistons
Fast 102 ported by tony Mamo
Nw 102 tb
Fast 36# inj and fast fuel rails
Arp head studs
Stock t56 with b&m short throw
Aluminum driveshaft

EXHAUST

homemade longtube headers
3 inch into flowmaster prochamber
3 inch mandrel bent into 3 inch stainless flowmaster tips
Should be loud but nice inside car

FUEL SYSTEM

15 gallon fuel cell with sending unit
A1000 with aeromotive filter
Fpr
8 feed and 6 return
Alot of time and money into this car as I wanted to keep it as streetable and comfortable to drive on street as possible,
6 speed, gas gauge, reverse lights, etc
Have to push clutch in to start car, radio

Even bought a small raptor shift light and installed it inside the ac vents to keep a stealthy look

Will be ready for tuner in two weeks( pat g) will be on streets near you in a week or so after once I get tags and ins

Enjoy pics

































And this is where I'm at currently



Big thanks to bad Chad, frank, Richard jones at jones automotive, stallings machine
And mike Johnson for the help and parts

 

Nice build

 

Contimplated buying that car from the previous two owners and finishing it,but the whole a/c delete killed it for me.Glad to see the car in the final stages and can't wait to see it roll out.

 

nice looking build. That thing should roll out pretty well.

 

Yea no ac sucks but oh well not my Dd so not to worried but goin to make a nice fair weather car for sure

Hopefully it runs good

 

Still wishing I would have tried to buy this car. Good looking build and great tuner choice!

 

Looking good David. Can't wait to come up to Humble and work the laptop magic on this beast.

 

looks good

 

Well pretty much all last week I was fighting issue after issue( clutch not bleeding, brakes dragging, wrong relays for fans, etc) but have made some pretty solid progress this week.

Got the exhaust on, brakes fixed, clutch bled, parking brake hooked up and functional. It will bust off but only runs for a sec due to vats not bein deleted, sounds like it might be pretty nasty lol

Here is a few pics from last night around midnight

 

Nice build, I had two foxes in my high school year and loved them. I wish I would have built something like this instead of this heavy *** 4th gen.

 

Beautiful I see one of those in my future.

 

You got that car together quick!
Congrats and keep us updated.

 

that thing looks nice! kinda looks like badchads shop ....

 

Great looking car

 

The pic of car was taken at his shop

Thanks everyone, not much left mainly tune and wire nitrous

 

one of the nicest cars and builds i seen u do twitch.looks dam good..

 

Car does look good, wish i did this to my fox before i sold it

 

Thanks buddy

 

me gusta. thing oughta be fun.

 

Great build. Ill be starting mine after the first of the year.