68 Camaro
#22
On The Tree
Join Date: Dec 2003
Location: Friendswood, Tx
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
68
You have a lot of work ahead of you, but thats what makes it fun, just don't give up on it halfway through and want to sell it like most people do....What part of Friendswood do you live in, I'd like to check it out one day....
#25
TECH Fanatic
Mate for a guy your age congrats, I'm impressed,with your ability we may have another great car, hotrod builder in the making. Looking forward to seeing the car when finished. just while i wait
#27
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: Alvin/Friendswood Texas
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Rainman: no im still in HS unfortinutely...
another update, pic looks teh same as before but i have all the inner fenders, quarters, snail panel, filler panel, and the trunk lide mocked up, just some minor fitting and then maybe tomorrow ill start welding the panels down i hope
another update, pic looks teh same as before but i have all the inner fenders, quarters, snail panel, filler panel, and the trunk lide mocked up, just some minor fitting and then maybe tomorrow ill start welding the panels down i hope
#28
Originally Posted by Camaro Zach
Rainman: no im still in HS unfortinutely...
another update, pic looks teh same as before but i have all the inner fenders, quarters, snail panel, filler panel, and the trunk lide mocked up, just some minor fitting and then maybe tomorrow ill start welding the panels down i hope
another update, pic looks teh same as before but i have all the inner fenders, quarters, snail panel, filler panel, and the trunk lide mocked up, just some minor fitting and then maybe tomorrow ill start welding the panels down i hope
Zach, it looks like your doing all of your sheetmetal work yourself, Im looking for someone to help repair my drivers side rocker panel. It's rusting out right below the corner of the door. What do you suggest?
-Gordon
#29
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: Alvin/Friendswood Texas
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LS-1st-Gen
Zach, it looks like your doing all of your sheetmetal work yourself, Im looking for someone to help repair my drivers side rocker panel. It's rusting out right below the corner of the door. What do you suggest?
-Gordon
-Gordon
#30
Originally Posted by Camaro Zach
If its just a short section then you can bend a piece of metal to fit the contour of the rocker and cut out the rusted part and weld in a new piece. Where are you located in Houston? i could help ya if you want
Im currently going to school out of town, but I get back into Houston every so often. I'll look you up when i get the chance. -Gordon
#31
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: Alvin/Friendswood Texas
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys i need some help. I have all the sheetmetal clamped in place and some of it tacked down, but i was wondering if i could get a second opinion from some of you guys to make sure i have it right. The main thing is the it seems like the drivers side quarter sits an 8th or a 1/4 inch further back then the passenger side, but it lines up with the rocker fine. If your interested in taking a look at the car I greatly appreciate it i'm ready to get this thing back on the road the right way.
Thanks,
Zach
Thanks,
Zach
#33
Teching In
iTrader: (7)
Join Date: Dec 2003
Location: Deer Park,Tx
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Hey Zach!
I also have a 68 camaro that I'm working on. If you need to take some measurements I live in the Deer Park area or maybe I can swing by tomorrow afternoon. Let me know.
John
I also have a 68 camaro that I'm working on. If you need to take some measurements I live in the Deer Park area or maybe I can swing by tomorrow afternoon. Let me know.
John
#35
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: Alvin/Friendswood Texas
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
well after being in storage for about 7 months its finally back and i should get back to work tomorrow.
Coming soon will be Cage/4 link, mock up LS1/t-56, and a whole list of other goodies
Coming soon will be Cage/4 link, mock up LS1/t-56, and a whole list of other goodies
#37
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: Alvin/Friendswood Texas
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Took the springs and shocks out, welded the shocks up and bolted them back in so it would sit low again Now to do something about those leaf springs. hrmmmm
#39
TECH Enthusiast
iTrader: (3)
Join Date: Jul 2005
Location: Tomball, Texas
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
hey man i go out to the friendswood/clearlake area every couple weeks from tomball to visit some friends of mine. id like check out the work your doin on it. and also, i have a question: i'm 17, and id like to know where you get the money to do all that