68 Camaro
#1
Thread Starter
TECH Apprentice
iTrader: (7)
Joined: Dec 2004
Posts: 374
Likes: 0
From: Alvin/Friendswood Texas
68 Camaro
Ok well here is my restoration thread, hopefully it will follow the complete restoration and *modification* of my 68 Camaro. If anyone wants to come check it out in person im in friendswood. I have all the pics so far on http://members.cardomain.com/43zach
The last attatched thumnail of the drivers side rear framerail has that big dent in it, i am not sure wether to cut that section out and replace it or not. I am not going to be running leaf springs so it wont have as much load on it as usual, and i dont know how it got there its in an odd place
Anyways thanks for looking,
Zach
The last attatched thumnail of the drivers side rear framerail has that big dent in it, i am not sure wether to cut that section out and replace it or not. I am not going to be running leaf springs so it wont have as much load on it as usual, and i dont know how it got there its in an odd place
Anyways thanks for looking,
Zach
#2
Welcome to the site Zach. You have a LOT of work ahead, I don't envy you
That dent from the frame rail might have been from a severely bottomed out rearend, perhaps in its earlier life someone removed any bumpstops.
probably won't hurt to leave it alone unless it bothers you cosmetically.
Tony
That dent from the frame rail might have been from a severely bottomed out rearend, perhaps in its earlier life someone removed any bumpstops.
probably won't hurt to leave it alone unless it bothers you cosmetically.
Tony
Trending Topics
#10
Thread Starter
TECH Apprentice
iTrader: (7)
Joined: Dec 2004
Posts: 374
Likes: 0
From: Alvin/Friendswood Texas
Update
Finals are done so now its time to start workin again. Patched alot of panels on the rear of the trunk yesterday, and today i got back to the drivers side minitubing. Got the inner fender completed and part of the frame/trunk floor notched. Also as always more pics are on my Cardomain page
Zach'
Zach'
#12
when do you plan to have this car running....???? I got a 68 Camaro thats currently having open heart surgery...... Tore the engine apart. . . .. going to rebuild it..... no $$$ so itll be a while
#17
You've got your work cut out for you... but its fun once you get it all done to look back at all the pictures and compare it to the finished product. It is amazing...
Here is a before picture of mine:
http://uploads.fakeleg.com/perm/MVC-012F.JPG
And a few after pictures:
http://uploads.fakeleg.com/perm/P5110218.JPG
http://uploads.fakeleg.com/perm/P5110219.JPG
http://uploads.fakeleg.com/perm/P5110220.JPG
Here is a before picture of mine:
http://uploads.fakeleg.com/perm/MVC-012F.JPG
And a few after pictures:
http://uploads.fakeleg.com/perm/P5110218.JPG
http://uploads.fakeleg.com/perm/P5110219.JPG
http://uploads.fakeleg.com/perm/P5110220.JPG
#18
Thread Starter
TECH Apprentice
iTrader: (7)
Joined: Dec 2004
Posts: 374
Likes: 0
From: Alvin/Friendswood Texas
Nice 69 Hawgs. 01 Red WS6, sure ill work on your project car if ya pay me Really the way i look at it after i get these quarter panels on the hard/ time consuming part is done.... Cage will be easy, rear suspsension will be easy, LS1/T56 shouldnt be too hard and everything else im doing shouldnt be too hard so i think i will start to pick up pace a little bit.