do you have a system in your f-body
#2
TECH Apprentice
iTrader: (22)
No pics yet cuz I'm in Iraq, but I can tell you what I got
Alpine IVA-D300 DVD player/monitor
Alpine MRV-F340 Amp
Alpine MRV-F540 Amp
2x JL Audio 10" 10w3v2 speakers
Subthump T-Top box
Rockford Fosgate 6.5" P162s component speakers for the front
Kicker SSMB6 6.5" midbass speakers for the rear
I spent the past 6 months buying all this stuff of the net (along with some other toys .......), so my first priority is installing all of this as soon as I get back home I PROMISE to post pics as soon as it's done.
Alpine IVA-D300 DVD player/monitor
Alpine MRV-F340 Amp
Alpine MRV-F540 Amp
2x JL Audio 10" 10w3v2 speakers
Subthump T-Top box
Rockford Fosgate 6.5" P162s component speakers for the front
Kicker SSMB6 6.5" midbass speakers for the rear
I spent the past 6 months buying all this stuff of the net (along with some other toys .......), so my first priority is installing all of this as soon as I get back home I PROMISE to post pics as soon as it's done.
Trending Topics
#10
TECH Senior Member
iTrader: (21)
ha haha Thanks guys....
Here is the run down.....
98 Blue Green Chameleon Trans AM with Suncoast Ram Air Hood
Eclipse 55090 DVD player in Pass. side Air bag mold painted the ame color as the car
From there a Fiberoptic line goes to the 2811 Dolby 5.1 Processor
From there 5 sets of RCA's go to the back of the car.
All Tsunami high end stuff
Eclipse 85WX4 for the Front and rears
It feeds the Diamond HEX 4" and tweets on the dash and Dyna Audio 5 1/4's in the doors at 2ohms
and the 6 1/2 Diamonds in the rear.
The 2nd amp is Eclipse 55WX2 bridged to feed the Diamond Hex 4" and a tweet for the Center Channel in Dolby 5.1
Then Three 130Wx2 bridged to about 450wX1. Each one feeds a Eclipse aluminum 12" 4ohm sub.
The back hatch was molded to hold and disply 4 of the 5 amps. The fifth amp (center channel amp) and the Phonix Gold 15 Farad capacitor are hidden below. The box and amp rack are molded as one and then the top piece of fiber glass was molded and sanded (40+ HR'd of anding there) Then sent off to the painter and painted.... (for free he liked the buisness i was giving him)...
The Eclipse 2811 Dolby Processor feeds video to the 7" screen that sits were the A/C and cd player used to sit. All the vacumm lines and wires were extended and fiber glass molded to fit the A/C controls in the Glovebox.
The car was built in a lil under month and would cost about $12-13K to dublicate...... it helped that i worked at the shop at the time (parts at cost and free labor, One of my close fiends and myself).... when i lived in Hawaii... and the owner wanted to do something to show what the shop could do.... and man was it a hit......
I have more pics of it going togeather if you guys want to see them....
The setup in the other Bird isnt bad either.....
Eclipse deck
Eclipse 85wX4 to the front and rears...
Eclipse 130wX2 bridged the the sub
Focal Utopia 165W's fronts
Diamond 6 1/2 coax rears
Focal Utopia 13" sub in hatch......
0/1 gauge to Phionex Gold 15 Farad Cap....
Kyle
Here is the run down.....
98 Blue Green Chameleon Trans AM with Suncoast Ram Air Hood
Eclipse 55090 DVD player in Pass. side Air bag mold painted the ame color as the car
From there a Fiberoptic line goes to the 2811 Dolby 5.1 Processor
From there 5 sets of RCA's go to the back of the car.
All Tsunami high end stuff
Eclipse 85WX4 for the Front and rears
It feeds the Diamond HEX 4" and tweets on the dash and Dyna Audio 5 1/4's in the doors at 2ohms
and the 6 1/2 Diamonds in the rear.
The 2nd amp is Eclipse 55WX2 bridged to feed the Diamond Hex 4" and a tweet for the Center Channel in Dolby 5.1
Then Three 130Wx2 bridged to about 450wX1. Each one feeds a Eclipse aluminum 12" 4ohm sub.
The back hatch was molded to hold and disply 4 of the 5 amps. The fifth amp (center channel amp) and the Phonix Gold 15 Farad capacitor are hidden below. The box and amp rack are molded as one and then the top piece of fiber glass was molded and sanded (40+ HR'd of anding there) Then sent off to the painter and painted.... (for free he liked the buisness i was giving him)...
The Eclipse 2811 Dolby Processor feeds video to the 7" screen that sits were the A/C and cd player used to sit. All the vacumm lines and wires were extended and fiber glass molded to fit the A/C controls in the Glovebox.
The car was built in a lil under month and would cost about $12-13K to dublicate...... it helped that i worked at the shop at the time (parts at cost and free labor, One of my close fiends and myself).... when i lived in Hawaii... and the owner wanted to do something to show what the shop could do.... and man was it a hit......
I have more pics of it going togeather if you guys want to see them....
The setup in the other Bird isnt bad either.....
Eclipse deck
Eclipse 85wX4 to the front and rears...
Eclipse 130wX2 bridged the the sub
Focal Utopia 165W's fronts
Diamond 6 1/2 coax rears
Focal Utopia 13" sub in hatch......
0/1 gauge to Phionex Gold 15 Farad Cap....
Kyle
#11
TECH Senior Member
iTrader: (21)
Originally Posted by slowpoke96z28
damn, man! thats pretty tight. 2 modded f-bodies on an enlisted-man's paycheck.
Kyle
#16
TECH Senior Member
iTrader: (21)
Originally Posted by Redgtstang95
How many batteries? Who changes the stations?
Oh and that was doen by myself... with my buddys help.... its not my fault hes a pro and taught be along the way.....
Kyle