See this yet? Cam and header results for a...
#1
TECH Fanatic
Thread Starter
Join Date: Aug 2002
Location: katy, tx
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
See this yet? Cam and header results for a...
Here are the latest dyno numbers for our latest Cam test. We took the already good cam that we had for the Z06 and changed it up some to come up with the following results.
546.6 rwhp 505.7 rwtq with LG Cam and LG Pro Long Tube headers.
We are working on our Final specs for our G7X-2 cam for the new Z06. And this looks like where we will stop for the X-2 cam. then on to the G7X-3 amd upward.
Of course we are using our LG Pro Long Tube headers which are still the standard of the Corvette market. And these numbers are WITH CATS.
We also use fully welded Merge collectors to avoid air leaks when slip on collectors are welded on. Slip on collectors will leak in the 30% of tubing that can not be welded. This will fool your 02 sensors with air infiltration, so we supply our headers with fully 360 degree welded Merge collectors.
We are still without tuning for a couple more weeks but that should just help to clean up the numbers and help the final results even more.
The graph has before numbers are from our 540rwhp 489rwtq cam. Our goal was to exceed 500 rear wheel torque, and you can see that we did easily. in the process we picked up another 25 ft pounds of rear wheel torque at 2800 rpms and 6 more rwhp.
This is also with the same "air filter mod" which means that the stock filter is removed for now until we get a good Cold Air induction for the Z06.
Also remember that this car dynoed stock at 443rwhp so we are at over a 100 hp gain.
thanks
Lou Gigliotti LGM
546.6 rwhp 505.7 rwtq with LG Cam and LG Pro Long Tube headers.
We are working on our Final specs for our G7X-2 cam for the new Z06. And this looks like where we will stop for the X-2 cam. then on to the G7X-3 amd upward.
Of course we are using our LG Pro Long Tube headers which are still the standard of the Corvette market. And these numbers are WITH CATS.
We also use fully welded Merge collectors to avoid air leaks when slip on collectors are welded on. Slip on collectors will leak in the 30% of tubing that can not be welded. This will fool your 02 sensors with air infiltration, so we supply our headers with fully 360 degree welded Merge collectors.
We are still without tuning for a couple more weeks but that should just help to clean up the numbers and help the final results even more.
The graph has before numbers are from our 540rwhp 489rwtq cam. Our goal was to exceed 500 rear wheel torque, and you can see that we did easily. in the process we picked up another 25 ft pounds of rear wheel torque at 2800 rpms and 6 more rwhp.
This is also with the same "air filter mod" which means that the stock filter is removed for now until we get a good Cold Air induction for the Z06.
Also remember that this car dynoed stock at 443rwhp so we are at over a 100 hp gain.
thanks
Lou Gigliotti LGM
#4
TECH Junkie
Join Date: Apr 2003
Location: Houston, TX
Posts: 3,340
Likes: 0
Received 0 Likes
on
0 Posts
WOW-thats pretty sweet!! The new Z06 is very very impressive-Cant wait to see how my year goes in 06 to try and see if I cant get one by years end!! They are very sweet cars and put down some extremely impressive #'s!!
#5
Originally Posted by XFACTOR
WOW-thats pretty sweet!! The new Z06 is very very impressive-Cant wait to see how my year goes in 06 to try and see if I cant get one by years end!! They are very sweet cars and put down some extremely impressive #'s!!
LOL put down the crack pipe and step away.
The new Z06 is bad a$$ for sure. Maybe one day I will pick one up used. In a couple of years when the V is paid for .
#6
TECH Junkie
Join Date: Apr 2003
Location: Houston, TX
Posts: 3,340
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JETG
LOL put down the crack pipe and step away.
The new Z06 is bad a$$ for sure. Maybe one day I will pick one up used. In a couple of years when the V is paid for .
The new Z06 is bad a$$ for sure. Maybe one day I will pick one up used. In a couple of years when the V is paid for .
Trending Topics
#8
TECH Fanatic
Thread Starter
Join Date: Aug 2002
Location: katy, tx
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
Yes, those are some impressive numbers for just a cam and headers. It gives you an idea of how much potential the new motor has. They don't even have tuning yet! Of course it is a 427 and the heads are awesome from the factory.