I need to get a bunch of Miscellaneous LS1 Stuff ASAP! These are the things I need, some I may have but will have to make sure but I need them all and if you dont need them and will give them away thats great too. Thanks

Pics to mike96z@yahoo.com

LS1 oil pan gasket
an oil cap
maybe some good plugs
just the disks for the centerforce II clutch
i need a ls1 accessorie belt, not ac
ls1 hoses
slave cylinder for ls1
o2 sensors
dipstick, not tube
thermostat housing
ls1 oil pan

if i dont have i need these

bolts from pressure plate to flywheel
oil pan bolts
1 bolt to perimeter valve covers

 

got the hoses 15 bucks for both. Im in arlington

 

oh and the thermostat housing and maybe a 160/180 stat. LS1 only has 2 hoses? and 2 on the side for heater correct? So would my LT1 Radiator still work? Id have to plug it at the bottom? I also need LS1 radiator.

pm me your address and i may come pick up the hoses.

 

I have a raidiator and fans...817 903 4986

 

I am not 100 percent sure but the Lt1 is reverse cooling so I dont think the radiators are the same.

 

Care for an after market oil gauge and sender?

ATM-5827

Brand: Auto Meter
Product Line: Auto Meter Phantom Analog Gauges
Part Type: Gauges, Analog
Gauge Style: Auto Meter Phantom
Gauge Type: Oil pressure
Gauge Range: 0-100 psi
Gauge Diameter (in): 2 5/8 in.
Gauge Diameter (mm): 67.00mm
Sweep: 90 degree sweep
Sending Unit: Electrical
Gauge Face Color: White
Gauge Number Color: Black
Pointer Color: Red
Bezel Color: Black
Liquid Filled: No
Sending Unit Included: Yes
Gauge Series: Analog

This gauge will fit perfectly in a Trans Am's AC vent.

Summit sells them for $60 plus $10 handling.
$40 plus shipping.
I will ship immediately, insure, and provide you a tracking number.
I'm located in DFW, TX.
Thanks,

Reason for sale.
I ended up going with a mechanical oil pressure gauge instead.

 

yes very interested in the sender and gauge, im local.

 

still need this stuff, ill get the hoses too. I can use the LT1 radiator, its the same just bigger so better cooling.

 

ya and the lt1 has an extra hole in it on the lower drivers side....

ive got a t-stat housing and might have acenterforce clutch

 

pm sent