txh0tb0i972

iTrader: (63)

i cant seem to find them.... a while back a rocker broke and the bearing were found ... well like 6 which leaves me to find about 27 more... lol well i drained the oil hoping to find them but i dont have a magnetic drain plug!!! i dont know why but i dont..... so im guessing they should be in the pan... but what do i do in this case.... how do i get them out? ....thx for support...if you need more info let me know thx!

edit...put a speaker to the oil pan and moved it around .... found about 4 needle bearings and this!

SSkillz

iTrader: (22)

Hope you find them
jk

txh0tb0i972

iTrader: (63)

bring a speaker...with a big magnet!!! lol....im going to stick under the oil pan and move it towards the drain hole... see what happens!!!

5w20

iTrader: (21)

uh oh

01WS6/tamu

iTrader: (37)

If they are in the bottom of the pan and the engine is not making noise they will not hurt anything. They will stay there and not move from the bottom. They are heavy enough they won't get sucked into the pickup tube screen. IMHO if it's quiet don't sweat it I've had it happen to a couple of my LS motors through the years with no I'll effects.

TheBlurLS1

iTrader: (8)

I also don't think they are big enough to go through the pickup tube screen, even if they do get over by it.

cabel1

iTrader: (3)

You won't get them all out without pulling the pan. They shouldn't hurt anything though.

txh0tb0i972

iTrader: (63)

cool thx! im pulling the heads anyways today hopefully i can examine the heads closer!

2000nbmZ

iTrader: (33)

check the oil plug ive seen them on there before

quickblade

take plug out, get yourself a extend-a magnet, and see if you can get them to the hole and out...