78 Malibu roller moly cage bullet proof MW rear
#1
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
78 Malibu roller moly cage bullet proof MW rear
Its hard to post this but here goes. I have owned for 9 years started out as a true little old lady car 53K mile car and used to be a fun mild street strip car. A few years ago I wanted to go fast ad race in a local heads up class but the car never got finished. Body has a few dings but is in original paint and has 0 rust anywhere.
I am selling with 9" rear with new Mark Williams Aluminum Center, lighted spool, and MW Superlight 35 sp axles with 5/8 studs right length for use with Magum/Alumastar type wheels. Gears a 3.90 street gears and were slightly used.
The cage was done after hours by the guy that welded for Wolfe Racecraft. The welds are like art work. Has Wolfe rear suspension and antirole bar installed in car.
Also come with 2 new Corbeau Forza race seats and a new bolt on Harwood hood.
Also was a hard to find factory aluminum core support.
There is currently no rear in the car but I will come out with a stock one so it can transport. The rally wheel in the pics are sold. Factory seats and carpet are gone. Trim parts such as bumper are all included just off the car currently.
I also have a ton of other parts many new in boxes that I will give the new owner first option to purchase.
I have a clear TX title
$5800 This is not a fire sale so I am not interested in low ball offers. There is more than $5,500 tied up in just the rear and cage work.
Might consider trades for pre 1973 GM driving car no bikes or boats will even be considered so don't ask
Richard 214-793-0029 after 6 or weekends
[img]http://www.deadzoom.com/member/gearheads78/78malibu/bucage7.jpg
[/img]
I am selling with 9" rear with new Mark Williams Aluminum Center, lighted spool, and MW Superlight 35 sp axles with 5/8 studs right length for use with Magum/Alumastar type wheels. Gears a 3.90 street gears and were slightly used.
The cage was done after hours by the guy that welded for Wolfe Racecraft. The welds are like art work. Has Wolfe rear suspension and antirole bar installed in car.
Also come with 2 new Corbeau Forza race seats and a new bolt on Harwood hood.
Also was a hard to find factory aluminum core support.
There is currently no rear in the car but I will come out with a stock one so it can transport. The rally wheel in the pics are sold. Factory seats and carpet are gone. Trim parts such as bumper are all included just off the car currently.
I also have a ton of other parts many new in boxes that I will give the new owner first option to purchase.
I have a clear TX title
$5800 This is not a fire sale so I am not interested in low ball offers. There is more than $5,500 tied up in just the rear and cage work.
Might consider trades for pre 1973 GM driving car no bikes or boats will even be considered so don't ask
Richard 214-793-0029 after 6 or weekends
[img]http://www.deadzoom.com/member/gearheads78/78malibu/bucage7.jpg
[/img]
#5
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
I want to send some money and finish the Olds. At this time in my life I just don't seem to have the time to spend on a track car. After the Olds is finished I will build another / street strip car
Unless I know who you are and that was a joke keep your comments to yourself jackass
Unless I know who you are and that was a joke keep your comments to yourself jackass
#7
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Don't really want to but since you are the third peson to ask the same qustion I would consider it.
-MW light weight 35 spline spool new $318
-MW bolt through case new $592
-MW 7/16" stud pinon support new $275
-new bearings $54
-new mis hardware $53
-used 3.90 gears set up and ready to go
I will take 1200.00 for it
-MW light weight 35 spline spool new $318
-MW bolt through case new $592
-MW 7/16" stud pinon support new $275
-new bearings $54
-new mis hardware $53
-used 3.90 gears set up and ready to go
I will take 1200.00 for it
Trending Topics
#9
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Yes it does. Only thing in the pics that is gone is the rally wheels. I also have other parts not included but I will sell after the car is officially sold. Built Deadenbear cased glide fresh, new Neal Chance welded converter, ported Brodix T1x headed 13.6 to 1 406 with ported to match super victor and new Jessle rockers, Poduct engineering vacuum pump and fuel pump. New Weld Drag Magnums 15 x 10" and 3.5" 2 piece and much more.
If the car sells I also have a nitrous fill station I will be selling.
If the car sells I also have a nitrous fill station I will be selling.