What is a good inch-pounds torque wrench?
#22
x2, Proto tools are of excellent quality.
If you can afford it, buy either Snap-on, FACOM or Britool. If on a budget, Proto is your best friend. Its just a little bit cheaper, but its right up there with all those 3 when it comes to quality.
Did you bother to take your torque wrench for a calibration test before you started using it?
If you can afford it, buy either Snap-on, FACOM or Britool. If on a budget, Proto is your best friend. Its just a little bit cheaper, but its right up there with all those 3 when it comes to quality.
Did you bother to take your torque wrench for a calibration test before you started using it?
#26
Registered User
Join Date: Oct 2009
Location: Newport News
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I am an aircraft mechanic by trade and all we have ever used is snap on. They have a wide selection, are easy to calibrate, and hold calibration well. Things about TQ wrenches you might not know.....
The upper and lower 10% of the torque selection is not accurate
Set the TQ wrench to its lowest setting when not in use.....not as far as it will turn down
A drop from anything more then 3 feet messes up the calibration on most TQ wrenches
Cycle the wrench 6-8 times at its highest value before use
Dial type wrenches are the most accurate
Snap-on sells a wrench with a digital gauge the vibrates and makes an audible tone when the set torque is reached. These are awesome and very accurate. Expensive but worth it.
The upper and lower 10% of the torque selection is not accurate
Set the TQ wrench to its lowest setting when not in use.....not as far as it will turn down
A drop from anything more then 3 feet messes up the calibration on most TQ wrenches
Cycle the wrench 6-8 times at its highest value before use
Dial type wrenches are the most accurate
Snap-on sells a wrench with a digital gauge the vibrates and makes an audible tone when the set torque is reached. These are awesome and very accurate. Expensive but worth it.
#27
I am an aircraft mechanic by trade and all we have ever used is snap on. They have a wide selection, are easy to calibrate, and hold calibration well. Things about TQ wrenches you might not know.....
The upper and lower 10% of the torque selection is not accurate
Set the TQ wrench to its lowest setting when not in use.....not as far as it will turn down
A drop from anything more then 3 feet messes up the calibration on most TQ wrenches
Cycle the wrench 6-8 times at its highest value before use
Dial type wrenches are the most accurate
Snap-on sells a wrench with a digital gauge the vibrates and makes an audible tone when the set torque is reached. These are awesome and very accurate. Expensive but worth it.
The upper and lower 10% of the torque selection is not accurate
Set the TQ wrench to its lowest setting when not in use.....not as far as it will turn down
A drop from anything more then 3 feet messes up the calibration on most TQ wrenches
Cycle the wrench 6-8 times at its highest value before use
Dial type wrenches are the most accurate
Snap-on sells a wrench with a digital gauge the vibrates and makes an audible tone when the set torque is reached. These are awesome and very accurate. Expensive but worth it.
#28
What's your budget?
I have a MAC tools dial indicating in/lb torque wrench that I use, got it used for ~$75 at a pawn shop, IIRC they are ~$200 new. The dial indicator style is easier to use and more accurate than the beam style, but the dial indicator style cost a bit more.
I have a MAC tools dial indicating in/lb torque wrench that I use, got it used for ~$75 at a pawn shop, IIRC they are ~$200 new. The dial indicator style is easier to use and more accurate than the beam style, but the dial indicator style cost a bit more.