What is a good inch-pounds torque wrench?
#1
What is a good inch-pounds torque wrench?
I will be needing to buy a QUALITY inch pounds torque wrench that actually clicks when it reaches the desired torque (unlike my craftsman one that does nothing when you get to the torque, which resulted in a broken intake manifold bolt). It will have to go as low as 44 inch pounds and preferably 3/8 drive or 1/4 drive. Thanks in advance.
#4
Are you serious!? I was so pissed off. I had just bought the thing and it didn't click for me and since I didnt know much about inch pounds, I just broke the bolt right in half. I believe it was a Craftsman Microtorq wrench. Needless to say, it is in the trash now and I wont be buying another cradftsman wrench (since torque wrenches are the ONLY handheld tools Sears wont replace for you (lucky me))
Trending Topics
#10
TECH Enthusiast
iTrader: (2)
If you guys have a Craftsman torque wrench with the click function and it malfunctions just tell them you purchased it within the year and in my experience the managers will make an exception. I have been with Sears nearly 3 years and I have seen this with probably 90% of all Torque wrench issues. If the clickers don't work for ya just use the old school bar torque wrench and it DOES have the forever guarantee and it's about $24-30 i just wish they made it in Inch lbs
#12
On The Tree
iTrader: (3)
Join Date: Nov 2001
Location: Raleigh, NC
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
I almost broke an intake bolt off using my old craftsman in-lb torque wrench when installing my LS6 intake as well. I've used it for years with no issues, and I guess I'm lucky that I "felt" I was pulling more than 44 in-lbs on the first pass. I ended up having to pull the head back into position for each bolt so it could click over... what a pain for 2 passes on 10 bolts. I tossed it in the garbage and am going to buy a snap on to go along with the two other bigger snap ons I already own. As mebuildit said, there is no comparison.
#16
LSX Mechanic
iTrader: (89)
Do not try and TQ the intake bolts. More times than not you'll break them. Just snug the bolts down in a pattern, and go back over them making a few passes while tightening them down. Use a small 1/4 ratchet so you dont have a tool that can apply a lot of torque/force.
I use german TQ specs on those. GuudNtite.
I use german TQ specs on those. GuudNtite.
#17
TECH Regular
Join Date: Jun 2004
Location: Houston, Tx
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
I replaced my craftsman torque wrench with a precision instruments (used to partner with snap-on I was told). It's a 1/2 and uses a split beam instead of a spring (available in 3/8 as well). It's all metal and no plastic pieces to break nor springs to wear out. For their 1/4 in lb wrench, it is only available using the spring but I've heard good things about them.
#18
Teching In
+1 For Snap on tools, especially precision items such as measuring items and torque wrenches. I've got a snap-on clicker 1/4" wrench, 3/8" wrench, 1/2" wrench, and a 3/8" dial snap on wrench. Used them day in/day out with my last shop and now use them at home. Never lost accuracy on any of them.