2001 ws6 m6...
#1
2001 ws6 m6...
ok its time to get my car listed, been draggin my feet on this but its time to go, the car is heavily modded and it perfect if you want a strong car with everything already done to it, the only down side to the car is the mileage 99k on it but it has never missed a beat and is 100% healthy.
i am posting from my work computer so i am not sure if i have any pics here but will get some up later
All work was done by East Side Performance in CT
MTI LID w/ K&N Filter
ESP ported tb
ESP ported MAF
ASP Pulley
ESP Cam 224/228 569/571 112 lsa 443 rwhp conservative tune
Edelbrock 205 heads
Edelbrock 1 3/4-1 7/8 stepped headers
Edelbrock y pipe
Magnaflow catback
Spec 3+ clutch
Hurst Billet Shifter w/ Lou's Short stick
Hurst Line Lock
Aftermarket Steel Driveshaft 1350 yolks
BMR K frame
BMR Upper and Lower A Arms
Hal Qa1 Shocks and Springs Front#325 spring
Hal Qa1 Rear Shocks
BMR Rod End ADJ PHB
ESP Rod End ADJ LCA
SLP sub frame connectors
SLP drive shaft loop
LCA Relocation brackets
MOSER 9 in rear
Strange "S" Alum center section 3:90 gear 1350 yolk
Tru Trac Posi
31 Spline axles
long aftermarket studs
Autometer Monster tach w/ shift light
NX EFI Single Nozle kit
MSD window switch
NX TPS switch
NOS Purge
HSW Mounting bracket for the NOIDS
Jimmy jams ashtray switch
Dyno tune heater
Dyno tune bottle mount (spare tire well)
Dyno Tune Digital Guages (NOS& Fuel) on A pillar
NX kit has only been used 2 times on the street, car just smokes the tires go figure lol...
Aftermarket Stereo Alpine
Sub kicker
AMP 350w memphis amp
Black 17x9.5 and 18x10.5 Black zo6 motorsport wheels
Custom Blackbird style stripes mine say WS-6 Ram Air
CETA painted bumper
Paint is good just repainted the nose this past winter and paint matches perfect.
Car was a test car for Edelbrock when their heads and headers came out, the install was documented by GM High Tech Magazine and a copy of the magazine will go with the car.
I am asking for $13,000 o.b.o will decuct $500 if you do not want the NOS
PM me if interested
__________________
i am posting from my work computer so i am not sure if i have any pics here but will get some up later
All work was done by East Side Performance in CT
MTI LID w/ K&N Filter
ESP ported tb
ESP ported MAF
ASP Pulley
ESP Cam 224/228 569/571 112 lsa 443 rwhp conservative tune
Edelbrock 205 heads
Edelbrock 1 3/4-1 7/8 stepped headers
Edelbrock y pipe
Magnaflow catback
Spec 3+ clutch
Hurst Billet Shifter w/ Lou's Short stick
Hurst Line Lock
Aftermarket Steel Driveshaft 1350 yolks
BMR K frame
BMR Upper and Lower A Arms
Hal Qa1 Shocks and Springs Front#325 spring
Hal Qa1 Rear Shocks
BMR Rod End ADJ PHB
ESP Rod End ADJ LCA
SLP sub frame connectors
SLP drive shaft loop
LCA Relocation brackets
MOSER 9 in rear
Strange "S" Alum center section 3:90 gear 1350 yolk
Tru Trac Posi
31 Spline axles
long aftermarket studs
Autometer Monster tach w/ shift light
NX EFI Single Nozle kit
MSD window switch
NX TPS switch
NOS Purge
HSW Mounting bracket for the NOIDS
Jimmy jams ashtray switch
Dyno tune heater
Dyno tune bottle mount (spare tire well)
Dyno Tune Digital Guages (NOS& Fuel) on A pillar
NX kit has only been used 2 times on the street, car just smokes the tires go figure lol...
Aftermarket Stereo Alpine
Sub kicker
AMP 350w memphis amp
Black 17x9.5 and 18x10.5 Black zo6 motorsport wheels
Custom Blackbird style stripes mine say WS-6 Ram Air
CETA painted bumper
Paint is good just repainted the nose this past winter and paint matches perfect.
Car was a test car for Edelbrock when their heads and headers came out, the install was documented by GM High Tech Magazine and a copy of the magazine will go with the car.
I am asking for $13,000 o.b.o will decuct $500 if you do not want the NOS
PM me if interested
__________________
Last edited by thechef; 01-04-2010 at 04:19 PM.
Trending Topics
#9
I sooo want this car but can't buy one until around May. I own a pest control business and that's when the money is best.
The car will undoubtedly be gone by then but that won't stop me from hoping. GLWS to me!
The car will undoubtedly be gone by then but that won't stop me from hoping. GLWS to me!