F/S 1998 Atomic Orange Z/28 Roller with new 10 point
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Bergen Co, NJ
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
F/S 1998 Atomic Orange Z/28 Roller with new 10 point
Year: 1998
Make: Chevrolet
Model: Camaro
Price: $6500
Mileage: 144000
Private or Dealer Listing: Private Listing
Location (State): NJ
Color: Orange
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
I just bought this from a member here on Tech. Here's the thread:
98 z/28 modded roller sold
My plans have changed due to unexpected, non-financial, reasons and this isn't a must-sell so please no low ball offers.
I had a full moly 10 point put in by Steve Silver with window net and Kirkey Pro-Drag seat. Cage is interesting. The top of the cage is pushed all the way up as far as it can go into the t-tops. The t-top lever was customized to clear. Also, we went a bit overboard and integrated full rocker bars to the cage. There are no swingouts. This was designed for safety.
I had a removable tow eye installed in the front bumper for easy winching.
Gutted all HVAC from behind the dash. All wiring harnesses tied off. Full interior reinstalled but no OEM front driver seat. I do have the passenger seat sitting in a warehouse.
Everything works in the car. All harnesses are there & no wiring cut. Only the driveline & brakes were removed. PCM, pedals, console, radiator, even the washer bottle is in there. Previous owner had the car painted 2009 Corvette Atomic Orange including into the door jambs & wheel wells. Matte black engine bay. Really nice job. That's what I liked about this car. Great job & very well done.
Complete roller ready for transplant. No part outs. Even though it's worth more in parts this is a race ready car. All the hard work is done.
All parts in the car below were installed or included by the previous owner and are new/unused unless noted:
1) New Moser 3rd gen 9" with Detroit Locker, 3.89, 31 spline (stock shocks/springs)
2) New BMR adjustable long torque arm
3) New BMR tubular upper & lower control arms with adjustable struts
4) New BMR tubular LSx K-Member
5) New BMR Driveshaft Loop
6) New Kirkey Pro Drag Seat (I installed)
7) New BMR Torque Arm Relocation Crossmenber for TH400 (I installed)
8) **New BMR Torque Arm Relocation Crossmenber for 4L60 (uninstalled) & can swap for TH400 with buyer**
Please PM me with any questions.
No drag wheels. Car is sitting on 4 temp spare donuts.
I am asking $6,500 obo via PM.
This is an as-is, where-is sale in northern NJ. However, I can deliver the car off the winch to your location within 2 hours of me for 50/hour each way plus tolls.
***I also have many other F-body parts for purchase***
1) New in box Covercraft Weathershield HP custom fitted black car cover. High end cover.
2) New in box Kirkey Black Pro-Drag Tweed Seat Cover
3) New in box BMR a/c delete panel (Hammertone)
4) New in box Weld Rod Lite 15" Alloy Drag Wheels (15x3.5 & 15x10)
5) Motor
6) New in box VFN Bolt On Sunoco Hood (smooth) **SOLD**
7) New in Box Lightweight VFN Hood Struts **SOLD**
Last edited by 04blowngoat; 05-18-2010 at 09:47 AM.
#5
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Bergen Co, NJ
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
I only bought the car. Everything the original seller had in that ad is in the car. If you read that ad you'll see he wanted $4,000 for the roller.
I bought the below for 4,300.00 (not "much less"):
Need to sell 98 z fresh paint 09 gm orange (corvette) paint is real nice all door jams are done. Grey interior is real nice (cloth seats) no rips scrapes etc. T-top car. All the factory wiring harnesses are still in the car. 9 inch rear locker and 33 spline axles,wilwood disc brakes. All tubular bmr front end with adjustable struts. New bmr adj.torque arm and relocation mount trans cross member,........Brand new in the box greg weld drag wheels 15x3.5 and 15x10 no tires mounted on them. .....
The following was not included and I did not buy them:
....hooker ceramic headers. .....Also to go with the car a 6.0 iron short block (stock) a pair of 317 heads, a 4l80e trans, new slp line lock, and the rest of the little things in the garage. I have way more invested than i will ever get back but a back injury forces me to sell the car. Looking for $5500 for everything. At this time i dont want to part anything out. I am located in south jersey. Can send more pics to a serious buyer.
So your point of "less than" is not accurate. I have included everything in the post. With exception of the wilwood disc brakes that WERE NOT on the car I am 100% passing it along. Also, something else you might assume, but would be wrong, I installed some of what he listed that were off the car.
10 point, net, kirkey, etc cost me as much as the car. Do you know how much moly 10 points cost? If you did then you'd realize I'm not making anything on the sale. Do the math.
You interested in it or just trolling my thread?
I bought the below for 4,300.00 (not "much less"):
Need to sell 98 z fresh paint 09 gm orange (corvette) paint is real nice all door jams are done. Grey interior is real nice (cloth seats) no rips scrapes etc. T-top car. All the factory wiring harnesses are still in the car. 9 inch rear locker and 33 spline axles,wilwood disc brakes. All tubular bmr front end with adjustable struts. New bmr adj.torque arm and relocation mount trans cross member,........Brand new in the box greg weld drag wheels 15x3.5 and 15x10 no tires mounted on them. .....
The following was not included and I did not buy them:
....hooker ceramic headers. .....Also to go with the car a 6.0 iron short block (stock) a pair of 317 heads, a 4l80e trans, new slp line lock, and the rest of the little things in the garage. I have way more invested than i will ever get back but a back injury forces me to sell the car. Looking for $5500 for everything. At this time i dont want to part anything out. I am located in south jersey. Can send more pics to a serious buyer.
So your point of "less than" is not accurate. I have included everything in the post. With exception of the wilwood disc brakes that WERE NOT on the car I am 100% passing it along. Also, something else you might assume, but would be wrong, I installed some of what he listed that were off the car.
10 point, net, kirkey, etc cost me as much as the car. Do you know how much moly 10 points cost? If you did then you'd realize I'm not making anything on the sale. Do the math.
You interested in it or just trolling my thread?
Last edited by 04blowngoat; 05-11-2010 at 02:14 PM.
Trending Topics
#9
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Bergen Co, NJ
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Price drop to well below cost. Buyer can see my Bill of Sale & cage/parts receipts at closing. I need this off the property.
Needs motor, transmission/driveline, & calipers only. The radiator is even still in the car.
Needs motor, transmission/driveline, & calipers only. The radiator is even still in the car.