Bhogan909

iTrader: (6)

Year: 1998
Make: Chevrolet
Model: Camaro
Price: $22500
Mileage: 113750
Private or Dealer Listing: Private Listing
Location (State): KY
Color: White
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine

1998 Chevrolet Camaro Z28
113,xxx miles on body
Original Arctic White
Grey Cloth Interior
Purchased in 2003 with 69,000 miles (estimated)
T-Tops
Sunoco Cowl Hood
SS Rear Spoiler
Berger Sail Panel
Polished Camaro Stainless Letters
SLP Bowtie Grille

ENGINE (2,000 miles)
348” Cubic Inch LS1
11.0:1 Compression
Mahle Forged Flat Top Pistons 3.905” Bore -4cc
-Hellfire 1.5mm, 1.5mm, and 3mm Rings
Eagle Forged Connecting Rods 6.125”
GM Stock Crankshaft Turned -10 3.62” Stroke
Trick Flow Specialties 220cc “As Cast” Heads
-2.04” Intake Valves
-1.57” Exhaust Valves
-Milled to 59cc Combustion Chambers
Comp Cams Custom 232/240 .580”/.580” 110 LSA
Morel Hydraulic Roller Lifters
F.A.S.T. 90mm Ported Intake
F.A.S.T. 90mm Polished Throttle Body
SLP 85mm Mass Air Flow Sensor
Custom 85mm Carbon Fiber Air Lid
Ford Motorsports 30 Pound SVO Injectors (Red Top)

EXHAUST
Kooks 1 7/8” Stainless Steel Race Headers
Custom 3” True Dual Exhaust
X-Pipe
Borla XR-1 Oval Race Mufflers Dumped

TRANSMISSION Installed July 4, 2010 (1,200 miles)
FLT Level 5 4L60E
Circle D Specialties +4C Torque Converter (4000 stall)

PAINT (850 Miles) Completed August 13, 2010
Custom Flame Paint Job
GM Arctic White Base
Black Sapphire Metallic
Torch Red
Tangelo Pearl
Hot Rod Blue “Jagged” Pinstriping

INTERIOR (300 miles)
Custom Interior
Black Leather
Black Suede
Silver Carbon Fiber
Torch Red Leather
Black Sapphire Painted Interior Trim Pieces

CHASSIS
6 Point Chromoly Rollcage Gunmetal Gray Metallic
-Dual Swingout/Removeable Doorbars
PA Tubular K-Member
UMI Tubular Panhard Bar
UMI Tubular Lower Control Arms
GM 10 Bolt 3:42 Gears TA Girdle Cover
Stock Springs and Shocks

STREET WHEELS/TIRES (1,200 miles)
17x9.5” Chome Deep Dish C6 Z06 Wheels (O.E. Wheels)
18x10.5” Chome Deep Dish C6 Z06 Wheels (O.E. Wheels)
275/40/ZR17 Nitto 555 Tires
285/35/ZR18 Nitto 555R Drag Radials

RACE WHEELS/TIRES (200 miles)
15x4” Bogart SS
15x10” Bogart SS Rim Screws Drilled
Mickey Thompson Sportsman 26-7.5-15 LT
Mickey Thompson ET Street Radials 275/50/15

This car has won NUMEROUS car shows and runs VERY WELL for a Street Car.

RACING
It has been a best of 11.3@121mph with a raceweight of 3862 pounds with me (300 pounds) driving. The car made 449rwhp locked on a Mustang Dyno and made 481rwhp locked on a Dynojet at 6800rmp. I have the PCM set to shift at 6500 to be safe. To go faster you will need more gear, ram air setup, and more rpm. I would recommend a 4.10 gear and 7000 rpm shiftpoints and the car would FLY. I refuse to cut the car up and remove weight and am ready to drag race more which is the reason for selling the car.

DRIVING
Air Condition and Heat are both still on the car and work. The A/C needs to be charged and the Heat works Great! The car is a pleasure to drive. It has the muscle car sound, but it still very pleasureable to ride in long distances. The door bars of the rollcage are easily removeable for more comfortable cruising.


SHOWING
The car is washed at least once per week with Meguiars Professional Line Hyper Wash using a microfiber towel and dried with an Absorber. There are 17 coats of wax on the car. The foundation started fresh after paint with “Fast Wax” which is safe for fresh paint and then followed with Meguiars M105, M205, and M21 Synthetic Sealant.

Below is a list of shows and results from the years:

2008
National Muscle Car Association
Fastest Street Car Nationals
Beech Bend Dragstrip
Bowling Green, KY
1st Place Best 93-Up F-Body
1st Place Best LS1 Powered Vehicle

2010 “Top”
Rollin Rods Car Show Top 35 out of 100
Cruise For Christ Car Show Top 25 out of 100
Tri-County Car Club Car Show Top 25 1986 & Newer
What Would Jesus Do Car Show Top 50 out of 100
Edmonson County Relay For Life Car Show Top 40 out of 100
Gloryland Harvest Church Car Show Top 50 out of 125
East Grayson Fire Department Car Show Top 25 out of 50
Stephensburg Car Show Top 100 out of 200

2010 “Best Of”
Munfordville Fire Department Car Show-Best Late Model
Freedom Fest Car Show-Best Newer GM
Hot August Nights Car Show-Best Car 1981 & Newer
Hot August Nights Car Show-Best of Show Car

2011 “Best Of”
Quilts For Kids Car Show-Best of Show
Quilts For Kids Car Show-Best Chevy

Asking $22,500. Just to give you a small example of the cost to duplicate this car

Shortblock $3,500
Heads $1,800
Camshaft $375
Lifters $450
Intake/TB $1,100
Headers $850
Exhaust $250
Mufflers $250
Transmission $2,000
Torque Converter $800
Custom Paint $4,000
Custom Interior $1,500
Rollcage $1,000
Tubular Suspension $500
Street Wheels/Tires $1,500
Race Wheels/Tires $2,000

That is $21,875 without any cost of Labor, not to mention the cost of the car itself. I do not have to sell this car, but I would like to build a 4th Gen LS1 car more suited to race. I will entertain offers of CASH, but please do not ask about trading a stock car plus cash. I would entertain offers of trade for 98 and up Camaros and Corvettes Autos ONLY ready to RACE!

Here is a link to several photos along the way of the car. If you require anything specific, please don't hesitate to ask. Before you say this is a LOT of money, you're right, it is, but it's not your average Head/Cam/Intake LS1 Camaro either!!!

http://s1126.photobucket.com/albums/l614/1qwikz/

Bhogan909

iTrader: (6)

Bhogan909

iTrader: (6)

TTT for today.

Bhogan909

iTrader: (6)

Also available as a roller if interested, PM me.

Bhogan909

iTrader: (6)

TTT for Wednesday. Make an offer if serious! I realize it's on the high side so make an offer, least I can say is no.

Josh@KY-Turbo

iTrader: (120)

I can personaly vouch for every aspect of this car. It is very clean, seeing he washes and detials it all the time. The car runs and Drives great. Makes great power across the RPM Band. It just flat works.

Dont hesitate to make hime an offer. He has made up his mind to build a Race Car for now. Bout Time for some Boost Bro...

odarabla

iTrader: (1)

Sorry to tell you brother but if you really want to sell that car you would need to shave about $10,000 off the price. My car is a 2002 Z28 with 44,000 miles and about $20,000 in more parts than you have and I would be lucky to get $15,000 for it and she looks new.. I know you didn't ask but this is the reason you aren't getting any hits..

Good luck with the sale.. Free bump just for sticking my nose where it don't belong..

odarabla

iTrader: (1)

If you are looking for a race car I have one pretty much set up for ya.. Full suspension (all BMR suspension and Strange single adjustable shocks), built th350 tranny with 8" converter, TCI torque plate and rachet shifter, Strange 12-bolt rearend, engine is a LS2 402ci with trickflow heads 215cnc heads that have been opened up to a 4" bore size and I dropped some bigger valves in, EPS custom cam, Ported fast 90mm intake, NW 90mm TB, Slp 85mm MAS, Racetronics fuel system, racetronics 42lb injectors, harland sharp roller rockers, futral hardened push rods, futral ported oil pump, LS2 timing chain, Double valve springs good for .650 lift cam, Ferra light weight valves, ARH 1 7/8 to 3" headers with custom true dual exhaust. I'm sure I am forgetting a few things but this isa about the gest of it.. I am looking for more of a street car instead of a race car.. If you are selling your car for $22,500 then I guess I should ask 32,500 for mine.. J/K man.. lol If you are interested make me an offer.. The new motor isn't in the car yet and it is still at the machine shop so if you wanted something changed with the engine setup you could do it now. BTW the rotating assembly is by Scat (I speced the rotating assmembly to handle about 1200hp but it does have flat top pistons) and the pistons are custom made by Autotech..

99f1

iTrader: (6)

make it all white...it will sell

Bhogan909

iTrader: (6)

All in all your car does not have a custom paint job, doesn't have a custom leather interior, and as far as the motor, it's not really any more expensive to build a bigger cube motor. Your car has a rear and I also have a 9" as well that will go to the buyer if the money is right. Our suspensions are similar except I do have stock springs and shocks.

The PCM does have 113,xxx miles showing on it, but nothing on the car has over 5,000 miles including the body. All suspension joints and parts are less than 5,000 miles.

To be honest with you I know there is no way your car is as clean as my car and you have a race car and this is more of a show car. Totally different bread of cars. And no thanks on the motor 1,200 hp will be WAY short of what I need.

Also are you selling 2 sets of wheels with your car?

I said I realize the price is high, but if someone wants it, they're going to have to pay for it. I'm not giving crap away...to each his own.

odarabla

iTrader: (1)

I don't need custom paint and leather seats to try and value my car with. My car is 4 years newer with a 1/4 of the miles on it and looks brand new.If you think the cost is similar to build a stock cube LS1 and stroke an LS2 for your car with the parts I have then I can see you don't really don't what you are talking about. This was not meant to be a debate but only to help but I can see i'm wasting my time. Let me know when you sell that 98 Z28 with over 100K miles on it for $22,500.00

Bhogan909

iTrader: (6)

Look I posted this car for sale to see if someone wanted the car more than I did. It's pretty simple you have a nice motor and suspension and if that's what you want, then great, but this car is more than you see it for. Like I said I'm selling this car and the price is what it is, if someone wants it more than me, then they can have it. I'm not going to get into a debate with you because penny for penny this car has more than it's fair share compared to your car. Please stay out of my thread if you have nothing else to say other than you think it's too high.

JHenke

Looks great Brian. Good luck with the sale despite all the "help" you are receiving.

Bhogan909

iTrader: (6)

Thank you sir!

Bhogan909

iTrader: (6)

TTT for Saturday!

odarabla

iTrader: (1)

Ima give you another free bump there buddy and goodluck selling the car..

sloganish

iTrader: (1)

No way! i literally just rode past your house the other day on my bike, i had to slow roll because i couldnt stop staring at the setup! car looks IMMACULATE!

sloganish

iTrader: (1)

And for the people that think the flame-paint isnt for them, i personally have NEVER liked it, but the pictures of the car dont do it justice. This thing looks MEAN!

Bhogan909

iTrader: (6)

Thanks a bunch for the comments! To the top and still for sale, have one very interested, but for sale until a deposit or payment is made.

topfig1

iTrader: (5)

Nice car! Welcome to LSIwanteverythingfornothing.com Good luck with the sale. I really hope someone that can appreciate it picks it up.


Angel