2MCHPWR

iTrader: (10)

Year: 1994
Make: Mazda
Model: RX-7
Price: $11500
Mileage: 116000
Private or Dealer Listing: Private Listing
Location (State): NY
Color: White
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has other engine

This is begging for an LS1 swap

Year: 1994
Make: Mazda
Model: RX-7
Price: $11,500
Mileage: 116000
Color: Chaste White
Private or Dealer Listing: Private Listing
Location: NY
I was going to bring it back to stock for AS class and also convert to manual transmission. I can help source the items because my friend has a rotary shop and has most of the parts necessary for the manual swap.

Runs great. AC is cold.
Body is almost excellent except for the small cracked paint on front bumper.
Very rare color/combo.
Black interior. Desirable cloth seats.
The only mods are a Koni adjustable shocks and PFS 3" cat-back exhaust.

Thanks.
pics:
http://209.177.55.37/tempimages/whitefd7.jpg

http://209.177.55.37/tempimages/whitefd17.jpg

http://209.177.55.37/tempimages/whitefd11.jpg

http://209.177.55.37/tempimages/whitefd16.jpg

frogslife2

bump for a 7 a lil high on price for an auto and needing work

2MCHPWR

iTrader: (10)

walk around vid:

http://www.youtube.com/watch?v=oCEdc9_TaZA&NR=1

2MCHPWR

iTrader: (10)

needs no work!

see detailed list of recent work done:

got the car detailed today; inside and out. looks amazing. pics don't do it justice





























Here is the list of new parts done on May 14, 2011:

Rotary engine compression test
Replace engine oil and filter
Install new spark plugs
Replace ignition wires
Remove aftermarket bov and install stock bov
Vacuum hose replacement and tie job
Replace oil metering lines
Replace fuel pulsation damper and associated fuel hoses
Re-seal oil pan and install reinforcement brace
Replace and relocate fuel filter
Replace coolant and flush system
Replace differential gear oil
Re-install stock intake, intercooler duct, and battery box
Replace front stabilizer end links, bushings, and mounts
Replace power steering hose
New OEM Mazda FD Oil Pan
Oil pan reinforcement brace 13brew and hardware kit
Replaced motor mount with steel arm, good condition
Hose Techniques silicone vacuum hose, black
Mazda OEM fuel pulsation damper
high pressure fuel injection hose
FD primary fuel injector insulator
Mazda OEM Fuel Filter
10w30 mineral motor oil, 1qt
Oil Filter, Mazda RX-7
Premium Coolant
Mazda oem water hose, from rear iron
Mazda oem water hose, behind alternator
HOSE/WATER throttle body
Mazda oem coolant hose, filler to overflow
Filler neck to ast hose, fd
at hose
NGK spark plugs
Mazda OEM NGK ignition wire set, fd
Stainless steel oil metering lines
Mazda OEM Oil Injector
Replaced sequential turbo solenoids
2 FD OEM Mazda Front Sway Bar Bushing
1 FD OEM Mazda Front Sway Bar End Link, Driver Side
1 FD OEM Mazda Front Sway Bar End Link, Passenger Side
1 FD OEM Mazda Sway Bar/Radiator Mount, Driver Side
1 FD OEM Mazda Sway Bar/Radiator Mount, Passenger Side
Mazda OEM AST and cap
Power steering pump to reservoir suction hose, fd
Oil level sender o-ring, fd
Oil Filler Neck O-ring, mazda oem
Idemitsu 75w90 Synthetic Gear Oil
Idler pulley with bearing, fd

2MCHPWR

iTrader: (10)

drove it today and was pleasantly surprised at how nicely it pulls. Hit 100 mph easy. made 10 lbs of boost:

http://www.youtube.com/watch?v=Iubu-Vygkmk

99TransAm666

iTrader: (6)

your not looking for any trades right?

2MCHPWR

iTrader: (10)

no trades. thank you.

CTSVBiggie

iTrader: (1)

Wish I had the money to get it... little high but that car is begging for a LS1 swap.

2MCHPWR

iTrader: (10)

on ebay. item 250873249468

Snyper

iTrader: (27)

Ill trade you my LS2 turbo swapped 350z roller for it. Im asking 12k for mine. Complete car minus engine/trans. Comes with wiring harnesses and turbo kit minus turbo/wg/bov...located in CT.

2MCHPWR

iTrader: (10)

sold. thanks.