1991 Camaro Z28. BBC
09-28-2011, 10:49 PM
#1
1991 Camaro Z28. BBC Year: 1991
Make: Chevrolet
Model: Camaro
Price: $8000
Mileage: 69000
Private or Dealer Listing: Private Listing
Location (State): IL
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
The car itself has the original paint, interior, rearend and suspension. No rust, has always been garaged. The interior is still like new. Original paint and body. Specs on the car.
Cloth interior 1 to 10 its a 9. No rips or tears.
No heater core
No radio
8 point chromoly 4130 tubular cage.
4 Inch Harwood cowl hood. needs to be painted.
Fog Lights
Power rear hatch
Lexan T Tops
T Top leather storage bag
New Fikse wheels and tires. $4,800 worth. Have reciepts.
Walbro 255 Fuel pump.
Custom 3 Inch X pipe.
Custom Trans Member
Custom Aluminum radiator
Custom Radiator fan mounts.
Power windows
Power door locks
Power mirrors
Power seat
Rear defroster
Viper alarm
Power Rear hatch
20% Window tint all around
Brand new carpeting
Motor specs
427 punched out to a 496 stroker.
Internally balanced
Bore 4.310
Stroke 4.250
New Scat Steel Crank
New Manley H Beam Rods
New SRP Pistons
New JE Rings
New Clevite bearings
New Chromoly Push Rods
New Springs
New Valves
New retainers
New Locks
New Keepers
New Valve seals
New Comp Cams Hydraulic roller lifters
New Comp cams Hydraulic roller cam Lift 612 Duration 314 on a Lobe of 110.
Chevy Oval port heads. 2.06 Intake 1.72 Exhaust
Canted degree angle.
Competition valve job.
New Timing chain
New Oil Pump
New Freeze Plugs
New Edelbrock RPM Air gap Dual Plane Intake
850 Demon carb
New March Pullies
New flex fan
New Edelbrock Mechanical Fuel Pump
New MSDdistributor
New water pump
New Moroso Plug wires
Air cleaner with new filter
New Alternator converted to one wire
New Thermostat housing and T stat.
New Valve cover breathers
Comes with Aluminum Overflow catch can
New High Torque stater
New Solid Motor mounts
New custom Aluminum Valve covers
The motor was thoroughly checked, hot tanked,pressure tested, bored, notched, line honed and assembled.
The motor dynoed on 518 HP and 541 TQ. Have the dyno sheet. The motor has the capabilities for 650HP with Aluminum heads naturally aspirated. It will also handle Nitrous.
The motor is together and has 540 miles on it since it was put together. Its ready from carb to oil pan ready to drop in. The only thing needed is either a flexplate or flywheel, spark plugs and your headers.
The motor cost $6,656 to build in just parts and machining. This doesnt include all the add ons of the engine. That was only the price of the long block. I have a little over 10 Grand in the entire setup.
I have all the reciepts for the motor build. $6,000 OBO.
383 specs.
Brand new 4 bolt main block
Blocks been decked,bored.030,notched and line honed.
It also has the lifter valley coated for easier oil run off.
ARP Hardware throughout
Probe SRS forged pistons
Probe forged steel crankshaft
Probe forged 4340 rods
Race rings
CL77 bearings
New oil pump
Dual roller timing chain
Brand new Comp Cams Hydraulic roller(562/580 lift) (248/254 Duration at 50) 110 Lobe seperation. This will make power from 3200 to 6200 RPM.
Chromoly pushrods
Compcams Endure X roller lifters
Brand new Dart Pro 1 Aluminum heads assembled 230 cc intake ports,64cc combustion chambers, 2.080/1.0600 valves. 690 max lift springs
Probe aluminum rocker arms 1.52 ratio
B&B Adjustable Billet timing pointer
Pro Race balancer SFI approved
Jegs heavy duty Flexplate also SFI approved
Jegs fuel Block off plate
Moroso 7 quart oil pan,street strip with driver side dip stick, wet sump with trap door.
Edelrock 750 carb. Needs to be tuned.
Weiand Intake manifold that has been Jet Hot coated
chrome thermostat housing
MSD 6A box $5,000 firm
$8,000 price, your choice of either motor and both transmissions. The car will also come with a extra rear bumper cover, it doesnt need it but I cant throw it out. Or take the car rolling for $4,500 . Im willing to sell each motor by itself as well.
I have reciepts for it all.
383 has a little over 1000 miles on it since built. I have more pics of the 383 if needed.
The BBC
Any questions call mike. 847-489-1982
Last edited by blown 346; 12-14-2011 at 10:45 AM.
