1986 Ford Mustang LX Notch - LQ9/4L80E Swapped
#1
Teching In
Thread Starter
Join Date: Oct 2010
Location: Springfied, MO
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Year: 1986
Make: Ford
Model: Mustang
Price: $10000
Mileage: 400
Private or Dealer Listing: Private Listing
Location (State): KS
Color: Blue
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Since I can't decide which one I want to part with, I'll see which one sells first.
This guy is a 1986 Notch, factory 5.0 car, not a 4 cylinder. Completely gone through and restored last summer from the ground up, I have tons of pictures of the entire project for anyone who is serious about making a purchase. I haven't driven the car much since I built it, but I did make it out to the track once with it, and put about 400 miles on it all together. At the track she ran a best of high 12s @ 109 mph with a 2.2 60 foot. Keep in mind this was with a stock 4L80E with a factory 1ton van converter, so she was a pig out of the hole. I bet it'll run low 11s with a good tire and the SS converter that comes with it installed.
Mods:
- Brand new grabber blue paint
- BOSS Fiberglass 3" Cowl Hood
- All new weatherstipping, window molding, ect
- New molded carpet
- New windshield
- New wheels and tires
-LQ9 Engine with 50-60k miles
-4L80E Transmission
-3" Aluminum Driveshaft
-MSD Wires
-8.8 Rear end w 3.73 gears and locking diff
-SN95 Spindles and rear disk brakes
-5 lug swapped
-New water pump
-Power steering
-Kooks 1 and 7/8 stainless longtubes
- 3.5" Stainless exhaust with stainless magnaflow mufflers
-Comes with new YankSS Converter can't remember if its 3600 or 3800 stall (not installed)
-Aftermarket gauges including speedo and tach
-08 Mustang seats
-New radiator
-Mark VIII Fan
-AJE K-Member
-Front coilovers with strange 10 way struts
-Full length welded subframe connectors
I'm sure there's more that I am missing but that's the bulk of it, at least from what I can think of. Feel free to reply, pm, or text me with any questions. 620-278-6131.
Thanks!
#3
Teching In
Thread Starter
Join Date: Oct 2010
Location: Springfied, MO
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
#5
Teching In
Thread Starter
Join Date: Oct 2010
Location: Springfied, MO
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Haven't had any reliability issues, but then again I have not driven it much. I finished the build and a few months later got a job out of state and had to move. The car is still back home in KS garaged with my folks. I've put about 500 miles on it, and 5 passes at the track. There is no A/C on this car, nor does it come with anything because this was a non-AC car from the factory. Heat only, and that is working. All pics are in the link below, please ignore the homemade headers and the aluminized x-pipe, that stuff has been replaced with kooks stainless headers and a stainless X pipe with magnaflows.
http://s279.photobucket.com/albums/k...03GTWat/Notch/
http://s279.photobucket.com/albums/k...03GTWat/Notch/
#7
Teching In
Thread Starter
Join Date: Oct 2010
Location: Springfied, MO
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bump. This car is back up for sale, I just don't see me being able to bring it over to where I am living now for some time to come. Here's more pics: http://s279.photobucket.com/albums/k...03GTWat/Notch/
I will consider cash offers as well as trades for a nice daily driver. No toys. Thanks.
I will consider cash offers as well as trades for a nice daily driver. No toys. Thanks.