Sold
#1
Thread Starter
10 Second Club
iTrader: (14)
Joined: Oct 2005
Posts: 1,384
Likes: 4
From: Concord, NC
Sold
Year: 2015
Make: Chevrolet
Model: Camaro
Price: $12500
Mileage: 500
Private or Dealer Listing: Private Listing
Location (State): NC
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
ENGINE:
Stock bottom end iron block 5.3 10.2:1 CR
ARP rod bolts and head studs
LS9 head gaskets
Melling HV oil pump
Cam Motion single roller timing chain
Trickflow 215 CNC heads 58cc chambers
Futral FM7 cam 224/230 .585/.585 114 LSA
Stock rockers with COMP trunion upgrade
Manton 3/8 pushrods
LS6 intake with stock throttle body
TURBO SYSTEM:
Truck Manifolds
2.5" hotside
twin 44mm wastegates 12# springs (CX racing)
twin 68mm turbos .68 AR housings (CX racing)
3" down pipes
Treadstone TT A2A Intercooler
2.5" coldside to IC, 3" to TB
Turbosmart boost controller
RPS 50mm BOV
FUEL SYSTEM:
Nasty Performance fuel cell
A1000 fuel pump
Aeromotive fuel pump controller
-10 feed, -8 return steel braided lines
Aeromotive Regulator, boost referenced
FIC 127# injectors
Edelbrock rails modified to fit stock style intake
E85 fuel
DRIVETRAIN:
Coan RMVB TH-400 with pro brake
Coan 3800 stall converter
Moser 12 bolt narrowed 2.5" per side 35 spline axles/spool/3.08 gears
DSS 3.5" Aluminum Driveshaft
B&M Pro Rachet Shifter
SUSPENSION:
BMR Kmember
Manual Rack
UMI Solid Motor mounts
Burkhart Chassis Manual brake kit
Burkhart Chassis Anti-roll bar
UMI tunnel mount TQ arm
Madman PHB and LCA's
QA1 rear shocks/front coilover
NRC 8.50 cert 10 pt cage with window Net, Wolfe Parachute mount with stroud chute.
Track wheels: Weld RTS 15x10/15x3.5 with 295/55 MT Radials
Street Wheels: Billet Specialties Street Lites 17x7/17x11.5 315/35 Radials
ELECTRONICS:
Racewire Solutions custom wiring harness (Car)
Schwanke Stand Alone LS Engine harness (gen 3 pcm)
99 Camaro ECU- tuned/logged with HP Tuners
This car is great, I enjoy driving it around town and to the track. Today its been a best of 5.87@124 with a 1.39 60 ft time. Currently runs on E85. The car is practically brand new, minus the brake calipers, and the front upper and lower control arms/spindles. Everything has been replaced. I will sell the car as a roller and part the rest out if interested. Just looking for something different, I dont hang onto cars very long. Open to trades looking for something stock or lighly modded. No bikes or trucks please.
The car is currently plasti-dipped flat black, but the red paint under is in excellent shape accept the front bumper cover with has some sun fading and a few spider cracks in the paint.
Last edited by WheelsUp84z; 06-09-2013 at 08:47 PM.