2002 10 Second Street car for sale.. My Loss is your gain!!
12-10-2008, 05:57 PM
#1
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
2002 10 Second Street car for sale.. My Loss is your gain!! Well the economy is finally starting to close in on me so the toys have got to go!! I am selling my 2002 Camaro Z28 10 second street car. It's two tone red with a black hard top (not t-top). Would make a good stripper car.. Very fun car to drive.. No expense was spared when building this car.. I bought this car just over a year ago with 32,000 original miles bone stock. I've since put a little over $20,000 into this car to create the monster you see today.. There is a video of this car at the track in my sig. (I've made a total of 6 track pulls with this motor since the work). Please serious inquires only. No reasonable offer will be turned down.. I am asking $16,000 for this car and it now has under 42,000 miles on it.. Here is a list of the mods. All engine work was done by Allan Futral. I can do a walk around video for anyone that is interested in this car. Just send me your e-mail address. This car is very dependable and can be driven anywhere. I prefer local buyer but will ship at buyers expense. If you have any questions please feel free to contact me. Thanks for looking..
MODS:
2002 Z28 Camaro A4 with Trickflow 215cc heads milled to 62cc, Harland sharp shaft roller rockers 1.7 ratio, 232/236-646/612-114LSA cam, FMS chrome-moly hardened 5/16" push rods 7.500", ARP hex head bolts, FMS ported oil pump, LS6-2 timing chain, 30lb SVO injectors, SLP 85mm MAF, SLP Lid, K&N drop in, welded in sub frame connectors, Hooker longtubes, custom true duals with Magna pack mufflers, PTC 4400 Stall converter, built 4L60E, Strange 12bolt with 4.11 gears, Billet Specialties light weight rims 15X10 in the rear and 15X3.5 in the front, 28" tall Hoosiers in the rear, ported fast 90mm, NW TB, Custom Racetronix / Walbro 255 pump and dyno tuned by Allan Futral.
MODS:
2002 Z28 Camaro A4 with Trickflow 215cc heads milled to 62cc, Harland sharp shaft roller rockers 1.7 ratio, 232/236-646/612-114LSA cam, FMS chrome-moly hardened 5/16" push rods 7.500", ARP hex head bolts, FMS ported oil pump, LS6-2 timing chain, 30lb SVO injectors, SLP 85mm MAF, SLP Lid, K&N drop in, welded in sub frame connectors, Hooker longtubes, custom true duals with Magna pack mufflers, PTC 4400 Stall converter, built 4L60E, Strange 12bolt with 4.11 gears, Billet Specialties light weight rims 15X10 in the rear and 15X3.5 in the front, 28" tall Hoosiers in the rear, ported fast 90mm, NW TB, Custom Racetronix / Walbro 255 pump and dyno tuned by Allan Futral.
Last edited by odarabla; 02-28-2009 at 11:06 PM.
12-10-2008, 06:21 PM
#3
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
I also have all the stock engine parts that will go with the car and a LQ9 6.0L engine block that I started on to build a 414ci for this car. I can still build the 414 for anyone that is intested. Allan Futral will be the one to spec out the cam on this motor. I was building this motor to be around 650hp to the flywheel. PLease let me know if you are interested.. Again thanks..
12-10-2008, 10:12 PM
#4
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Bump for a good deal? By the way this car went 10.99@122mph NA on stock bottom end and a full weight car 3600lbs with me in it.
Last edited by odarabla; 12-11-2008 at 12:58 AM.
Trending Topics
12-11-2008, 12:31 PM
#13
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Trust me I am sorry I have to sell it to!! Here is a walk around video of the car.. If you would like any other videos please let me know..
http://videos.streetfire.net/video/w...for_204901.htm
http://videos.streetfire.net/video/w...for_204901.htm
Last edited by odarabla; 12-11-2008 at 02:49 PM.
