2002 z28 procharged 650rwhp
06-02-2009, 08:02 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (13)
Join Date: Sep 2003
Location: new york
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
2002 z28 procharged 650rwhp 2002 z28 camaro-black with ebony leather, ttops,lme 365 forged blueprinted motor,ati procharger d1sc supercharger,hp pro tunning software,wideband,acpt carbon fiber driveshaft,weld in subframe connectors,umi kmember, aluminum panhard and lca's, strano swaybars,suspenstion upgrades,6 speed with textralia clutch, twin in tank pumps(one needs the wiring finished), speedinc high flow lines and rails, 17 inch black chrome zr1 rims with 315's on the rear and 275's up front,arh headers and catted y,hooker catback, and many other performance goodies. car put down 659 hp at the wheels on its break in tune. less than 2000 miles on the motor and 17,900 on the body. car is perfectly driveable just needs a couple small projects finished. i have the parts but not the time. serious inquiries only.you could parts it out for alot more, i just dont have the time.
365 cid
9.5.1 compression
gm nodular crank
manley 6.125 h beam rods
wiesco forged reversed dome fi pistons
total seal stainless chrome rings
clevite bearings
durabond cam bearings
arp studs(main caps)
223/228/.577.578 114=4 cam
jp double roller timing set
melling ported oil pump
chrome moley pushrods
arp head bolts
harland sharp modded rockers
cleaned 317 heads milled to 68 cc chambers
patriot gold dual valve springs
ls7 lifters
stock rear with stock 3.42 gears
new era did the breakin tune and it was running out of fuel. thats why i added the second in tank and fuel rails over the winter. still needs its drivability tune. car is drivable but can use some tweaks especially after the second pump is wired in.
15200.......price is firm (have stock hood ,passenger airbag,carpet(oozite in there now)4psi hobbs switch and rims included)
ny zip 14616
365 cid
9.5.1 compression
gm nodular crank
manley 6.125 h beam rods
wiesco forged reversed dome fi pistons
total seal stainless chrome rings
clevite bearings
durabond cam bearings
arp studs(main caps)
223/228/.577.578 114=4 cam
jp double roller timing set
melling ported oil pump
chrome moley pushrods
arp head bolts
harland sharp modded rockers
cleaned 317 heads milled to 68 cc chambers
patriot gold dual valve springs
ls7 lifters
stock rear with stock 3.42 gears
new era did the breakin tune and it was running out of fuel. thats why i added the second in tank and fuel rails over the winter. still needs its drivability tune. car is drivable but can use some tweaks especially after the second pump is wired in.
15200.......price is firm (have stock hood ,passenger airbag,carpet(oozite in there now)4psi hobbs switch and rims included)
ny zip 14616
Trending Topics
06-20-2009, 09:28 AM
#13
TECH Enthusiast
Thread Starter
iTrader: (13)
Join Date: Sep 2003
Location: new york
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
last price drop before the parts out.......14000 need it sold! but thats as low as i can go.....if i had the time the chop saw would be running right now! good fathers day present to some one........ after this week youll start seeing the parts in the for sale section and ebay.
