99 camaro ls1 m6 8000
#1
99 camaro ls1 m6 8000
I have a 99 camaro ls1 m6. c6 wheels 19 in back and 18 up front. The car has 90 thousand miles on it and runs like new every thing works on it. I found a ws6 i want. It has a flow master cat back on it and a stage 3 clutch in it. A/C blow's ice cold. The bad is the hood is startin to bubble and the seat is ripped. I am askin 8000obo.
#6
Would you be interested in this? http://www.mautofied.com/1990-Eagle-...ing/100206641/
Very fast car
mod's on my car are.
Bolt-on Modifications----------------------------------------------------------
-4G63T 6 Bolt engine (engine was put in at 100k miles)
-EIII16G #47 Turbo
-Ported 2G exaust manifold with external 38mm wastegate dumped into atmosphere
-Megan Racing full turbo back exaust stainless steel 3"
-Mass Air Flow Translator MAFT
-3" GM MAF
-FIC 950cc injectors
-Adjustable FPR with gauge
-Walbro 255HP fuel pump with hot wire kit
-Greddy BOV vented to atsmosphere
-Greddy FMIC with short piping (still has power steering)
-NGK BPR7ES plugs
-Accell 8mm spark plug wires
-Vacuum lines removed
-KoyoRad Radiator with Samco hoses
-Slim Line Fans, one pusher one puller
-JMF polished SS exaust manifold cover
-SBR valve cover
-SBR MBC
Engine Management------------------------------------------------------------------
-ECMlink V3, stutterbox with anti-lag ,no lift to shift, Dell laptop computer for tuning
-AEM wideband A/F gauge
-Ultra-Light 30# boost gauge
-AEM 5 bar MAP
-AEM AIT
Engine Internals----------------------------------------------------------------------
-Ported head, 1mm oversize valves, manley springs, BC 272/272 cams
-ARP head studs
-ARP exaust manifold studs
-ARP SS Turbo bolts
-Cometic MLS head gasket
-HKS kevlar timing belt
Drivetrain Modifications---------------------------------------------------------------
-Dogboxracing racing trans with double syncro 2nd and welded center diff
-ACT 2900# with street disk,XACT flywheel 500miles on clutch
-SBR shift improver
-Prothan mounts
-4 bolt rear, 93 Talon axles rear
-Fidanza axles in front
-B&M short throw shifter
Suspension Modifications--------------------------------------------------------------
-18" Exel wheel's white, 235 40 R18 Nankang tires
-Tokico struts
-Stock springs
Drive's good and 80% of the part's are new, clutch has only 500 miles on it.
Let me know.
Very fast car
mod's on my car are.
Bolt-on Modifications----------------------------------------------------------
-4G63T 6 Bolt engine (engine was put in at 100k miles)
-EIII16G #47 Turbo
-Ported 2G exaust manifold with external 38mm wastegate dumped into atmosphere
-Megan Racing full turbo back exaust stainless steel 3"
-Mass Air Flow Translator MAFT
-3" GM MAF
-FIC 950cc injectors
-Adjustable FPR with gauge
-Walbro 255HP fuel pump with hot wire kit
-Greddy BOV vented to atsmosphere
-Greddy FMIC with short piping (still has power steering)
-NGK BPR7ES plugs
-Accell 8mm spark plug wires
-Vacuum lines removed
-KoyoRad Radiator with Samco hoses
-Slim Line Fans, one pusher one puller
-JMF polished SS exaust manifold cover
-SBR valve cover
-SBR MBC
Engine Management------------------------------------------------------------------
-ECMlink V3, stutterbox with anti-lag ,no lift to shift, Dell laptop computer for tuning
-AEM wideband A/F gauge
-Ultra-Light 30# boost gauge
-AEM 5 bar MAP
-AEM AIT
Engine Internals----------------------------------------------------------------------
-Ported head, 1mm oversize valves, manley springs, BC 272/272 cams
-ARP head studs
-ARP exaust manifold studs
-ARP SS Turbo bolts
-Cometic MLS head gasket
-HKS kevlar timing belt
Drivetrain Modifications---------------------------------------------------------------
-Dogboxracing racing trans with double syncro 2nd and welded center diff
-ACT 2900# with street disk,XACT flywheel 500miles on clutch
-SBR shift improver
-Prothan mounts
-4 bolt rear, 93 Talon axles rear
-Fidanza axles in front
-B&M short throw shifter
Suspension Modifications--------------------------------------------------------------
-18" Exel wheel's white, 235 40 R18 Nankang tires
-Tokico struts
-Stock springs
Drive's good and 80% of the part's are new, clutch has only 500 miles on it.
Let me know.
#7
On The Tree
iTrader: (2)
Join Date: Dec 2008
Location: cincinnati
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
would you be interested in a 2000 chevy crew cab dually and some cash?
http://cincinnati.craigslist.org/cto/1343465275.html
and what is your location?
http://cincinnati.craigslist.org/cto/1343465275.html
and what is your location?
Trending Topics
#9
Located in south ms. I might be interested in the cobra. I am going to wait and see if it sell's. I found a ws6 I really want. That is the only reason I am sellin mine beacause I cant have both.